[Volume Settings] (Touch Panel Model)

For the touch panel model, set whether the machine emits sounds notifying you of operations and statuses.Adjusting the Sound Volume (Touch Panel Model)
[Fax Tone]
[Ring Tone]
[TX Done Tone]
[RX Done Tone]
[Scanning Done Tone]
[Entry Tone]
 
[Invalid Entry Tone]
[Restock Supplies Tone]
[Warning Tone]
[Job Done Tone]
[Energy Saver Alert]
[Original in Feeder Detection Tone]

[Fax Tone]

[Menu] [Preferences] [Volume Settings]
Specify whether communication sounds are emitted when sending faxes.
Dragging the slider to the right increases the volume.
Dragging the slider to the far left mutes the sound.
4 levels

[Ring Tone]

[Menu] [Preferences] [Volume Settings]
Specify whether a fax reception sound is emitted.
0 (Off)
1 to 3

[TX Done Tone]

[Menu] [Preferences] [Volume Settings]
Specify whether a fax transmission completion sound is emitted.
0 (Off)
1 to 3
[When Error]
[Off]
[On]

[RX Done Tone]

[Menu] [Preferences] [Volume Settings]
Specify whether a fax reception completion sound is emitted.
0 (Off)
1 to 3
[When Error]
[Off]
[On]

[Scanning Done Tone]

[Menu] [Preferences] [Volume Settings]
Specify whether a fax scanning completion sound is emitted.
0 (Off)
1 to 3
[When Error]
[Off]
[On]

[Entry Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when you press the keys and buttons on the operation panel.
[Off]
[On]

[Invalid Entry Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when an invalid key is pressed, such as when you enter a value outside the setting range.
[Off]
[On]

[Restock Supplies Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when the toner cartridge is nearing the end of their lifetime.
[Off]
[On]

[Warning Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when the machine has a paper jam or other malfunction.
[Off]
[On]

[Job Done Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when the print operation on the machine is completed.
[Off]
[On]

[Energy Saver Alert]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when the machine enters and exits sleep mode.
[Off]
[On]

[Original in Feeder Detection Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when an original is loaded in the feeder.
[Off]
[On]
94WS-0A4