Setting Up

After installing the machine, configure the required settings to enable use of the functions by performing the following steps.
Touch Panel Model
5 Lines LCD Model

Touch Panel Model

Steps 1 to 3 are the machine settings.
Step 4 is the setting for using the machine from a computer. Configure this setting for each computer using the machine.
Step 1
When you turn ON the machine for the first time, the screen (Setup Guide) for setting the items required for using the machine is displayed. Configure the settings by following the instructions on the screen.
Configuring the Default Settings (Setup Guide) (Touch Panel Model)
Step 2
Configure the network settings not included in the Setup Guide.
If you did not connect to the network using the Setup Guide, do that during this step.
Setting Up the Network
Step 3
Set the items required to perform fax operations by following the instructions on the screen.
Configuring the Fax Settings (Fax Setup Guide) (Touch Panel Model)
Step 4
Install the software required to use the machine and any printer and fax drivers on your computer.
Installing Software and Drivers to the Computer

See Also

Implementing Measures to Prevent Unauthorized Access
It is important to provide measures against security risks when using the machine in a network environment. Check examples of measures that you can take with the machine.
Measures to Prevent Unauthorized Access
Checking Available Functions
The functions available on the machine vary depending on the model. Check the functions that are available on your model.
Supported Functions
Configuring the Settings Required to Use the Functions of the Machine
Additional settings may be required depending on your model. For details about the settings required for each function, see the following:
Printing Preparations
Preparations for Linking with Mobile Devices and Integrating with a Cloud Service

5 Lines LCD Model

Steps 1 and 2 are the machine settings.
Step 3 is the setting for using the machine from a computer. Configure this setting for each computer using the machine.
Step 1
When you turn ON the machine for the first time, the screen (Setup Guide) for setting the items required for using the machine is displayed. Configure the settings by following the instructions on the screen.
Configuring the Default Settings (Setup Guide) (5 Lines LCD Model)
Step 2
Configure the network settings not included in the Setup Guide.
If you did not connect to the network using the Setup Guide, do that during this step.
Setting Up the Network
Step 3
Install the software required to use the machine and printer driver on your computer.
Installing Software and Drivers to the Computer

See Also

Implementing Measures to Prevent Unauthorized Access
It is important to provide measures against security risks when using the machine in a network environment. Check examples of measures that you can take with the machine.
Measures to Prevent Unauthorized Access
Checking Available Functions
The functions available on the machine vary depending on the model. Check the functions that are available on your model.
Supported Functions
Configuring the Settings Required to Use the Functions of the Machine
Additional settings may be required depending on your model. For details about the settings required for each function, see the following:
Printing Preparations
Preparations for Linking with Mobile Devices and Integrating with a Cloud Service
95LS-012