Reducing Power Consumption (Sleep Mode)
Sleep mode reduces power consumption by pausing certain operations inside the machine.
You cannot manually put the machine into sleep mode. If no operations are performed for a certain period of time, the machine automatically enters sleep mode.
The display turns off in sleep mode.
You cannot manually put the machine into sleep mode. If no operations are performed for a certain period of time, the machine automatically enters sleep mode.
The display turns off in sleep mode.
Exiting Sleep Mode
Press any key on the operation panel to exit sleep mode. |
Configuring Auto Sleep Time
Auto Sleep is a function that automatically places the machine into sleep mode if no operations are performed for a certain period of time. You can specify the timing of Auto Sleep.
This section describes how to configure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings. [Timer/Energy Settings]
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings. [Timer/Energy Settings]
1
Log in to Remote UI. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of Remote UI
3
Click [Timer Settings] 
[Edit].
[Edit].The [Edit Timer Settings] screen is displayed.
4
Enter the time in [Auto Sleep Time].
* It is recommended to use the default setting to efficiently save power. [Auto Sleep Time]
5
Click [OK].
The settings are applied.
6
Log out from Remote UI.
 | ||
The machine does not enter sleep mode in the following cases: When the data indicator on the operation panel is lit or blinking Operation Panel When the [Menu] screen, a paper jam or other error message*1, or Direct Connection SSID or network key display screen is displayed on the operation panel When the machine is performing an adjustment, cleaning, or other operation When the machine is communicating with a computer or similar device
|