[Special Processing]

Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
* Values in bold red text are the default settings for each item.
 

[Special Paper Processing]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Specify special processing for the paper in the following situations:
If you are using special paper
To print on the back of printed paper
For paper with a rough surface
If the envelope flap is stuck down
If the paper curls during printing
[Manual Back Side Print (2-Sided Only)]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
If you are using paper that has already been printed on, printing on the back side may appear faint. If so, specifying [On] for that paper source may improve the print results.
* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending on the operating environment humidity, changes in image quality may occur.
[Drawer 1]
[Off]
[On]
*1 May not be displayed depending on the model, the installed options, and other settings.
[Rough Surface Paper Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
if you are using paper with a rough surface, printed images may appear faint. If so, specifying [On] for that paper source may improve the print results.
* Specifying [On] in this setting may lead to slower print speeds or changes in the image quality.
[Drawer 1]
[Off]
[On]
[Envelope Flap Closing Prevention]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
Depending on the type of envelope and the operating environment, the envelope flap may stick down during printing. If so, specifying [On] in this setting may reduce the likelihood of envelope flaps sticking down.
* If this is set to [On], the print may be faded because the toner is not fully fixed on the paper.
[Off]
[On]
[Paper Curl Correction]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
Depending on paper used, the paper may curl during printing. If so, specifying [On] in this setting may alleviate paper curling.
* Specifying [On] in this setting may lead to faded print.
[Off]
[On]

[Reduce Ppr. Sticking at Output]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
In 2-sided printing involving multiple pages, printed paper sheets may stick together. If so, specifying [On] in this setting may reduce the likelihood of paper sheets sticking together.
* This setting is also effective for 1-sided printing.
[Off]
[On]

[High Humidity Mode]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Printing in a high-humidity environment may cause uneven print density. If so, specifying [On] may improve the print results.
* Specifying [On] in this setting may lead to blurred images and/or text in low-humidity environments.
[Off]
[On]

[Low Humidity Mode]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Printing in a low-humidity environment may lead to blurred images and/or text. In this case, selecting [Mode 1] may improve the print results. If that does not work, try selecting [Mode 2] and then [Mode 3].
* Enabling this setting may reduce the density or create fading in a humid environment.
[Off]
[Mode 1]
[Mode 2]
[Mode 3]

[Reduce Ghosting 1]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
If you print on small-sized paper and then continue printing on a larger sized paper, ghost images may appear in the unprinted sections of the paper. In this case, selecting [On] may improve the print results.
* When you select [On], the printing speed may decrease.
[Off]
[On]

[Prevent Fogging]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
White (blank) areas in the printed image may be darkened. If so, specifying [On] may correct the problem.
* When you select [On], the print density may decrease.
[Off]
[On]

[Reduce Toner Flaking]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Depending on the paper type and operating environment, the toner in printed images may peel off. If so, specifying [Mode 1] in this setting may improve the print results. If this does not solve the problem, specify [Mode 2].
* Enabling this setting may result in ghosting in blank areas.
[Off]
[Mode 1]
[Mode 2]

[Correct Paper Conveyance]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Continuous printing may result in repeated paper jams. In this case, selecting [On] may reduce the frequency of paper jams.
* When you select [On], the printing speed may decrease.
[Off]
[On]

[Talc Paper Mode]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
When you use very dusty paper, the printed image may be faded, or streaks may appear in the image. In this case, selecting [On] may improve the print results.
*When you select [On], the print quality may be affected.
[Off]
[On]

[Correct Blurry Image]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Smudges may appear on the printed paper. In this case, selecting [Mode 1] may improve the print results. If that does not work, try selecting [Mode 2].
[Off]
[Mode 1]
[Mode 2]

[Transfer Adjustment Mode]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Depending on the paper used, printing may appear uneven with printing in a humid environment. In this case, selecting [Mode 1] may improve the print results. If that does not work, try selecting [Mode 2].
* When this setting is enabled, the print density may vary in an environment with low humidity.
[Off]
[Mode 1]
[Mode 2]

[Reduce Faint Print After Replacing Cart.]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Print may be faded immediately after installing a new replacement toner cartridge. If so, specifying [On] in this setting may improve the print results. This setting takes effect the next time a toner cartridge is replaced.
* Specifying [On] will result in a longer delay than usual between replacing toner cartridge and being able to print.
[Off]
[On]
94RC-0AW