Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition. * Values in bold red text are the default settings for each item.
Specify special processing for the paper in the following situations:
If you are using special paper
To print on the back of printed paper
For paper with a rough surface
If the envelope flap is stuck down
If the paper curls during printing
[Manual Back Side Print (2-Sided Only)]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
If you are using paper that has already been printed on, toner smudges and splatters may appear on the back side. If so, specifying [On] for that paper source may improve the print results.
* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending on the operating environment humidity, changes in image quality or paper jams may occur.
Uneven images may appear on the printed paper. In this case, specifying [Mode 1] may improve the print result. If this does not correct the problem, select [Mode 2] and [Mode 3] in that order.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.
[Adjustment/Maintenance] 
