Paper Jams in the Feeder
Check the paper jam location on the screen, and follow the procedure below to remove the original.
When the 2-Sided Single Pass Feeder (Single Pass DADF-C) is attached
The Single Pass DADF-C is an optional product.
1
Remove the originals in the original supply tray.
2
Check whether an original is jammed in the feeder cover.
 | Pull the lever to open the cover.  |
 | Remove the original.  |
 | If an original is jammed, gently pull it out in the direction of the arrow.  If you cannot remove the jammed original, proceed to the next step without forcibly removing it. |
3
Check whether an original is jammed in the original output tray.
| Turn the green knob counterclockwise.  |
| If an original is jammed, gently pull it out in the direction of the arrow.  |
4
After removing all jammed originals, close the feeder cover.
5
Lift up the feeder. If an original is jammed, remove it.
| Lift up the feeder.  |
| If an original is jammed, gently pull it out in the direction of the arrow.  |
6
Return the feeder to its original position.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
 |
When closing the feeder, take care that your eyes are not exposed to light emitted through the platen glass. |
When the 2-Sided Double Pass Feeder (DADF-BA) is attached
The DADF-BA is an optional product.
1
Remove any originals from the original supply tray.
2
Check whether an original is jammed in the feeder cover.
| Pull the lever to open the feeder cover.  |
| If an original is jammed, gently pull it out in the direction of the arrow.  |
3
Check whether an original is jammed in the original output tray.
| Turn the green knob counterclockwise.  |
| If an original is jammed, gently pull it out in the direction of the arrow.  |
4
Check whether an original is jammed inside the inner cover of the feeder.
| Open the inner cover of the feeder.  |
| If an original is jammed, gently pull it out in the direction of the arrow.  |
| Close the inner cover of the feeder. |
5
After removing all jammed originals, close the feeder cover.
6
Lift up the feeder, and check whether there is a jammed original.
| Lift up the feeder, and check the position indicated by  . |
| If an original is jammed, gently pull it out in the direction of the arrow.  |
7
Return the feeder to its original position.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
|
When closing the feeder, take care that your eyes are not exposed to light emitted through the platen glass. |