<Adjust Action>
Specify the settings for adjusting the machine's actions.
|
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. Item marked with an asterisk (*)Only appears if you have the option installed. Checking the Options Installed on This Machine |
<Saddle Stitch Staple Repositioning> *
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Action>Feeds papers to the saddle stitcher unit and staples them several times, and performs the saddle stitch staple repositioning procedure. The machine performs this adjustment procedure if stapling has not been performed after you clear a staple jam or replace the staple cartridge.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Saddle Stitch Staple Repositioning> | <Start> | Yes | Yes | No | No | No | - |
 |
Make sure to remove all output booklets from the booklet tray before performing the saddle stitch staple repositioning procedure. |
|
Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the saddle stitcher unit by the machine. 305 mm x 457 mm, A3, B4, A4R, 11" x 17", LGL, LTRR, or custom paper sizes equivalent to these paper sizes can be used. (Make the paper source to which transparencies are registered unavailable.) |
<Adjust Saddle Stitch Fold Position/Stitch Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>Adjust the saddle stitch fold position and staple position so that they are at the center of the paper. Print a test page, check the current state of the fold position and the shift width on the test page, and then perform adjustment. Adjusting the Saddle Stitch Fold Position and Staple Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Saddle Stitch Fold Position/Stitch Position> | Adjust Saddle Stitch Fold Position/Stitch Position | Yes | Yes | No | No | No | - |
<Adjust Fold Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust the paper folding position. Adjusting the Saddle Stitch Fold Position and Staple Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Fold Position> | <Current State>: <A Is Shorter> <A and B Are Equal> <B Is Shorter> <Shift Width (a)>： 0.0 mm to +2.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | No | - |
<Time Until Stapling Starts in Stapler Mode> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set the time until stapling is performed after inserting paper when using manual stapling.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Time Until Stapling Starts in Stapler Mode> | 1 to 3 to 5 second | Yes | Yes | No | No | C | Settings/Registration Basic Information |
<Start Key Touch Recognition Delay>
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>Adjust the touch time required to begin startup processing.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Start Key Touch Recognition Delay> | -1 to 0 to +7 | No | No | No | No | C | Settings/Registration Basic Information |
|
This setting does not appear on models with an upright control panel. |