Replacement Parts

This section describes the replacement parts (consumables/consumable parts) used by the machine. Purchase the replacement parts from the your dealer or service representative that you purchased the machine from. Follow the precautions when handling and storing the replacement parts.

For optimum print quality, using Canon genuine Toner, Cartridge and Parts is recommended.

Consumables

Consumable Parts


For information on handling and storing the replacement parts, follow the precautions indicated in the Important Safety Instructions included with the machine. You can check the current amount of replaceable parts remaining. Checking the Remaining Amount of Consumables

Consumables

Toner Cartridge for Replacement

Confirm that the code on the front cover of the machine and the one on the package of the genuine toner are the same.

Model name	Genuine Canon toner
imageRUNNER 2945i / 2945 / 2935i / 2930i / 2930 / 2925i / 2925	Canon NPG-90 Toner Black


Store Toner Cartridges as Described Below Store toner cartridges in the following conditions: Storage temperature range: 10 °C to 30 °C Storage humidity range: 20 % to 80 % RH (relative humidity, condensation-free)* * Even within the approved storage humidity range, water droplets (condensation) may develop inside the toner cartridge if the temperatures inside and outside the toner cartridge differ. Condensation will adversely affect the print quality. Store unopened until immediately prior to use. When storing toner cartridges, do not store them upright or upside down. Do not store toner cartridges in the following locations: Locations exposed to open flames Locations exposed to direct sunlight Locations exposed to excessively salty air Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia) Very hot and/or humid locations Locations subject to dramatic changes in temperature and humidity likely to cause condensation Very dusty locations Locations within the reach of children Locations close to products that emit magnetism

Store Toner Cartridges as Described Below

Store toner cartridges in the following conditions:

Storage temperature range: 10 °C to 30 °C

Storage humidity range: 20 % to 80 % RH (relative humidity, condensation-free)*

* Even within the approved storage humidity range, water droplets (condensation) may develop inside the toner cartridge if the temperatures inside and outside the toner cartridge differ. Condensation will adversely affect the print quality.

Store unopened until immediately prior to use.

When storing toner cartridges, do not store them upright or upside down.

Do not store toner cartridges in the following locations:

Locations exposed to open flames

Locations exposed to direct sunlight

Locations exposed to excessively salty air

Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia)

Very hot and/or humid locations

Locations subject to dramatic changes in temperature and humidity likely to cause condensation

Very dusty locations

Locations within the reach of children

Locations close to products that emit magnetism


Be careful of counterfeit toners Please be aware that there are counterfeit Canon toners in the marketplace. Use of counterfeit toner may result in poor print quality or machine performance. Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner. For more information, see global.canon/ctc.


For information on the collection of used toner cartridges, see the Important Safety Instructions.

Drum Unit

Product Name	Model Number
imageRUNNER 2945i / 2945 / 2935i / 2930i / 2930 / 2925i / 2925	Canon NPG-87 Drum Unit

Store drum units as described below
Storing drum units in an improper location or environment may cause problems such as data loss. Storage temperature range: 10 °C to 30 °C Storage humidity range: 20% to 80% RH (relative humidity, condensation-free)* * Even within the approved storage humidity range, water droplets (condensation) may develop inside the drum cartridge if the temperatures inside and outside the drum cartridge differ. Condensation will adversely affect the print quality. Store unopened until immediately prior to use. Store the packaging material safely for future use. It will be needed for situations such as storing the machine with the drum cartridge removed. Do not store drum units upright or upside down. Do not store drum units in the following locations: Locations exposed to open flames Locations exposed to direct sunlight or bright light for five minutes or more Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia) Very hot and/or humid locations Locations subject to dramatic changes in temperature and humidity likely to cause condensation Very dusty locations Locations within the reach of children Locations close to products affected by magnetism (e.g. floppy disks or disk drives) Locations close to products that emit magnetism

Store drum units as described below

Storing drum units in an improper location or environment may cause problems such as data loss.

Storage temperature range: 10 °C to 30 °C

Storage humidity range: 20% to 80% RH (relative humidity, condensation-free)*

* Even within the approved storage humidity range, water droplets (condensation) may develop inside the drum cartridge if the temperatures inside and outside the drum cartridge differ. Condensation will adversely affect the print quality.

Store unopened until immediately prior to use.

Store the packaging material safely for future use. It will be needed for situations such as storing the machine with the drum cartridge removed.

Do not store drum units upright or upside down.

Do not store drum units in the following locations:

Locations exposed to open flames

Locations exposed to direct sunlight or bright light for five minutes or more

Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia)

Very hot and/or humid locations

Locations subject to dramatic changes in temperature and humidity likely to cause condensation

Very dusty locations

Locations within the reach of children

Locations close to products affected by magnetism (e.g. floppy disks or disk drives)

Locations close to products that emit magnetism

Staple Cases for Replacement

Always use the dedicated replacement staple cases for this machine. Note that the model number of the staples to use differs according to the finisher.

Finisher name	Genuine Canon staple case
Inner Finisher-L	Staple-P1

Consumable Parts

Waste Toner Container

Make sure to use the dedicated waste toner container for this machine.

WT-202

Fixing Assembly

The replacement procedure is in the following PDF file. Also follow the instructions provided by your dealer or service representative.

FX-504

(Replacement Procedure)

Secondary Transfer Outer Roller

The replacement procedure is in the following PDF file. Also follow the instructions provided by your dealer or service representative.

TR-501

(Replacement Procedure)

ITB Unit

The replacement procedure is in the following PDF file. Also follow the instructions provided by your dealer or service representative.

TB-502

(Replacement Procedure)

ADF Maintenance Kit (for DADF-BA)

The replacement procedure is in the following PDF file. Also follow the instructions provided by your dealer or service representative.

DR-202

(Replacement Procedure)