This screen is displayed when you press [Status Monitor] on the [Home] screen and other locations. Use this screen to check the information of the machine, usage and logs, network settings, and error information. You can also use this screen to remove USB memory devices from the machine.
[Error Information/Notification] You can check the information of errors that occur on the machine. Take troubleshooting measures according to the error details. A Message Appears An Error Code Is Displayed
[Device Information]
[Paper Information] Check the remaining amount of paper for each paper source.
[Check Consumables/Other] Check the status of the machine, such as the amount of toner in the toner cartridges or waste toner container. Other internal parts may reach the end of their lifetime before the toner runs out.
[Secure Print Memory Usage] Check to see how much memory is used by the Secure Print data temporarily saved to the memory of the machine.
[Version Information] Displays the firmware version information of the machine.
[Serial Number] Displays the serial number of the machine.
[Network Connection Type] Check whether the machine has a wired or wireless connection. Displays the connection status and error information when connected by wireless LAN.
[Direct Connection Information] Displays the connection status when directly connected to a device.
[IEEE 802.1X Error Information] Displays the details of errors that occur with IEEE 802.1X authentication.
[Rmv. Mem. Media] Displayed when a USB memory device is connected. Press to remove the USB memory device. Removing the USB Memory Device
[IP Address] Displays the IPv4 address of the machine by default. You can also hide this. [Display IP Address]
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.
Portal Top
