[Special Processing]

Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
* Values in bold red text are the default settings for each item.

[Special Paper Processing]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Specify special processing for the paper in the following situations:

If you are using special paper

To print on the back of printed paper

For paper with a rough surface

If the paper curls during printing

[Manual Back Side Print (2-Sided Only)]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

[Special Paper Processing]

If you are using paper that has already been printed on, printing on the back side may appear faint. If so, specifying [On] for that paper source may improve the print results.

* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending on the operating environment humidity, changes in image quality or paper jams may occur.

[Drawer 1]

[Off]

[On]

[Drawer 2]

[Off]

[On]

[Adj. Toner Vol. for Color Print.]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

You can prevent excessive toner from being fixed onto paper to reduce print failure such as poor toner fixing or bleed-through. Reducing Toner Used When Color Printing

[Off]

[Level 1]

[Level 2]

[Fill Area Image Adj. Mode]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

When printing an original with a lot of fill, correct the unevenness of the filled part. Correct Unevenness of Filled Part

[Mode 1]

[Mode 2]

[Mode 3]