Adjusting Print Quality
Adjust the settings below if printing results are not satisfactory.
Gradation Adjustment
If color gradation reproducibility has become so poor that the printed gradation differs markedly from the print data, make adjustments to improve color gradation reproducibility.
Density Correction
If the density of the printing is significantly different from the original document, this adjusts the scan density to be closer to the original.
Color Mismatch Correction
If the colors of printing run or blur, color mismatch (color misregistration) may have occurred. The problem may be improved by performing color mismatch correction.
Vividness Setting
You can increase the saturation of colors for color printing.
Image Size Adjustment
If the size of the image copied is slightly different from the original, fine adjustment is performed so that the printed size more closely matches the size of the original.
Dither Pattern Setting
A dither pattern suitable for an image is set to enable the gradations and curves in the image to be reproduced as smoothly as possible in the print.
Color Profile Registration
Use this setting to match colors to other printer models or to ensure that specific colors are reproduced accurately.
Toner Amount Reduction
You can prevent excessive toner from being fixed onto paper to reduce print failure such as poor toner fixing or bleed-through.
Uneven Fill Correction
You can correct irregularities in a fill area that may occur when printing a document containing a large fill area.