<Paper Output Settings>

Specify the Paper Output Settings that are common to all the functions.
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.
Item marked with an asterisk (*)
May not appear on some models or in some installed option configurations.

<Offset Jobs> *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
This enables you to shift the output for each job when multiple jobs are printed consecutively.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Offset Jobs>
<On>, <Off>
Yes
Yes
Yes
Yes
C
Settings/Registration Basic Information

<Job Separator Between Jobs>

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
This enables you to insert the specified paper at the start of each job when multiple jobs are printed consecutively.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Job Separator Between Jobs>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
<Change> (Select Paper Source)
Yes
Yes
Yes
No
C
Settings/Registration Basic Information

<Job Separator Between Copies>

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
This enables you to insert the specified paper each number of copy sets to divide the sets. If you set this, paper is inserted when printing with Collate (Page Order), Offset, or Staple.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Job Separator Between Copies>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
<copies> (1 to 10 to 9999)
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
<Change> (Select Paper Source)
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
If you are using the Group mode, you cannot insert job separation sheets between copy sets.

<Action When Too Many Sheets to Staple> *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
You can specify the procedure to perform when there are too many sheets to staple.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Action When Too Many Sheets to Staple>
<Print without Stapling>, <Cancel Printing>
Yes
Yes
No
No
B
Settings/Registration Basic Information
For information on printing using stapling, see Finishing with the Stapler.

<Enable Offset for Single-Sheet Print Jobs> *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
Specifying <On> in this setting allows you to output single-page print jobs with the sheet offset in the following situations:
Shift is specified when job is received
Printing of multiple copies is specified when job is received
 
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Enable Offset for Single-Sheet Print Jobs>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
This setting is disabled for copy jobs.
A94Y-0K4