Staple Jams in the Staple Finisher-X/Booklet Finisher-X
|
Check before clearing staple jamsIf a paper jam occurs at the same time as a staple jam, remove the jammed paper before removing the jammed staples. Before clearing the staple jam, remove all output paper from the booklet tray. |
Stapler Unit
1
Remove the paper waiting to be stapled from the delivery tray.
2
Open the front cover of the finisher.
3
Pull out the staple case from the stapler unit.
Hold the green tab of the staple case, and pull it out straight toward you.
4
Push up the bracket on the staple case.
5
Remove all the jammed and protruding staples from the staple case.
6
Return the bracket on the staple case to its original position.
7
Hold the green tab, and push the staple case back into the stapler unit until it is securely in place.
8
Close the front cover of the finisher.
Saddle Stitch Unit
1
Open the front cover of the finisher.
2
Pull out the saddle stitcher unit.
3
Pull out the two staple cases.
4
Hold both sides of the staple case, and lower the bracket.
5
Remove all the jammed and protruding staples from the staple case.
6
Return the bracket on the staple case to its original position.
7
Insert the two staple cases into the saddle stitcher unit.
Make sure that the staple cases are inserted so that the setting position marks are aligned as shown in the illustration above.
8
Push the saddle stitcher unit back into the machine, and close the front cover of the finisher.