![](./images/global_images/1T0007889550/gl_style_note1_L=en-GB.gif)
![]() |
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. Item marked with an asterisk (*)Only appears if you have the option installed. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Output Tray Settings> | <Tray Home Position>*1: <Tray A>, <Tray B>, <Tray C>, <Off> <Tray A>: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2> <Tray B>: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2> <Tray C>: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2> <Tray D>*1: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2> | Yes | Yes | Yes | No | A | Settings/Registration Basic Information |
*1 May not appear on some models. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Use Optional Output Tray> | <Output Tray 1>: <On>, <Off> <Output Tray 2>: <On>, <Off> | Yes | No | No | No | A | Settings/Registration Basic Information |
![]() |
The output trays which can be used vary depending on the optional equipment attached, such as the finisher. For more information, see Optional Equipment. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<High Volume Stack Mode> | <On>, <Off> | Yes | Yes | No | No | B | Settings/Registration Basic Information |
![]() |
When you specify <On> in this setting, the effects of the factors below may result in problems such as pages not being output to the tray correctly or falling out of the tray. Temperature and humidity Paper characteristics and curling Stacks of sheets that exceed the printer's specifications. (Depending on the paper used and the function settings, the number of sheets stacked in the tray could exceed the specified limits.) |
![]() |
If this function is set to <On>, the tray order to which prints are output is fixed as follows: Tray B → Tray A → Tray C (if available). If the output destination tray reaches its full capacity, jobs other than the current job (No Collating) are stopped. The jobs restart once you have removed all the paper in the tray. You cannot specify <On> in this setting in the following cases: When the "Booklet Trimmer-G" is installed During copying/printing When <Limited Function Mode> is set to <On> |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Offset Jobs> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Job Separator Between Jobs> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
<Change> (Select Paper Source) | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Job Separator Between Copies> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
<Copies> (1 to 10 to 9999) | Yes | Yes | Yes | No | C | Settings/Registration Basic Information | |
<Change> (Select Paper Source) | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
![]() |
You cannot insert job separation sheets between copy sets in the following cases. Note that the available functions and papers differ depending on your model and the installed options. If you are using the Group, Booklet, Saddle Stitch, or Fold mode. If you are using tab paper. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Different Paper Sizes for Output Tray> | <On>, <Off> | Yes | Yes | Yes | No*1 | A | Settings/Registration Basic Information |
*1 Indicates information that is delivered only if the number of output trays is the same for the machine that is sending device information and the device receiving the information. |
![]() |
If you set <Different Paper Sizes for Output Tray> to <Off>, printing may stop when the message <Remove the paper from the output tray.> appears. To resume printing, remove all of the paper from the output tray. If you set both the Different Size Originals and Staple modes, outputs are stapled and collated, regardless of the Different Paper Sizes settings. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Align Output Paper of Diff. Sizes (Diff. Widths)> | <On>, <Off> | Yes | Yes | Yes | No | B | Settings/Registration Basic Information |
![]() |
If you use paper smaller than A5R, the output paper cannot be aligned. |
![]() |
When <Align Output Paper of Diff. Sizes (Diff. Widths)> is set to <On>, printing stops temporarily if all of the available output trays have reached their stacking limits. If you remove the output paper from the trays, the trays move upward and printing resumes. Even when <Align Output Paper of Diff. Sizes (Diff. Widths)> is set to <Off>, you can align output paper if you are using paper with the same width. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Unprocessed Tab Paper Forced Output> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
![]() |
If <Unprocessed Tab Paper Forced Output> is set to <On>, the extra amount of tab paper sheets that were not required for the job are forced out of the machine. Example: If the number of tabs is set to <5> and the machine estimates that seven sheets of tab paper are needed for the print job, you must prepare two sets of tab paper each containing five tabs (10 total). Therefore, if the machine only uses seven tab paper sheets, three tab paper sheets will remain. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Action When Too Many Sheets to Staple> | <Corner/Double>: <Print without Stapling>, <Cancel Printing> <Saddle Stitch>: <Print without Stapling>, <Cancel Printing> <Eco (Staple-Free)>: <Print without Stapling>, <Cancel Printing> | Yes | Yes | No | No | B | Settings/Registration Basic Information |
![]() |
For information on printing using stapling, see Finishing with the Stapler. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Enable Offset for Single-Sheet Print Jobs> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
![]() |
This setting is disabled for copy jobs. |