<Maintenance>

Specify the settings for the machine's auto cleaning function.
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.

<Clean Feeder>

 (Settings/Register)  <Adjustment/Maintenance>  <Maintenance>
If streaks appear on originals scanned with the feeder or paper that is printed, execute <Clean Feeder>. Cleaning the Feeder
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Clean Feeder>
<Start>
Yes
Yes
No
No
-

<Clean Pressure Roller for Fixing>

 (Settings/Register)  <Adjustment/Maintenance>  <Maintenance>
If printed paper is dirty, execute <Clean Pressure Roller for Fixing>.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Clean Pressure Roller for Fixing>
Paper Select, <Start>
Yes
Yes
No
No
-

<Original Scanning Area Cleaning Method>

 (Settings/Register)  <Adjustment/Maintenance>  <Maintenance>
Start the video that shows how to clean the platen glass.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Original Scanning Area Cleaning Method>
Displays the Cleaning Method
Yes
Yes
No
No
-

<Check Maintenance Method>

 (Settings/Register)  <Adjustment/Maintenance>  <Maintenance>
For information on how to replace consumables and remove jammed paper, see the sample video.

<Initialize After Replacing Parts>

 (Settings/Register)  <Adjustment/Maintenance>  <Maintenance>
You must initialize the printer after replacing parts. Initialize the printer for each replaced part.

<Low Toner Consumption Printing Mode>

 (Settings/Register)  <Adjustment/Maintenance>  <Maintenance>
If you do not expect to use much yellow toner, set this to <On> before installing the yellow toner cartridge.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Low Toner Consumption Printing Mode>
<On>, <Off>
Yes
Yes
No
No
Settings/Registration Basic Information
If you set this to <On>, the print speed may be slower.

<Control Detected Condensation>

 (Settings/Register)  <Adjustment/Maintenance>  <Maintenance>
Set whether to start the process to remove condensation when condensation is detected inside the machine. If you set this mode to <On>, the process to remove condensation is automatically performed.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Control Detected Condensation>
<On>, <Off>
Yes
Yes
No
No
Settings/Registration Basic Information
When <On> is selected:
<Jobs to Restrict When Condensation is Detected>: <Only Received Jobs>, <All Jobs>
During the process to remove condensation, printing may not be performed correctly resulting in the paper being blank.
To maintain the effect of the process to remove condensation going when this mode is set to <On>, it is necessary to keep the machine's power ON.
Print jobs that are carried out during the process to remove condensation are restricted by the <Jobs to Restrict When Condensation is Detected> settings.
<Only Received Jobs>: Regardless of the <Use Fax Memory Lock>/<Use I-Fax Memory Lock> settings, the received fax/I-fax data is stored in Memory RX Inbox and cannot be printed during the process to remove condensation. Reports that are automatically output at the specified time cannot be printed.
<All Jobs>: All print data cannot be printed during the process to remove condensation.
If you select <On> and press <OK>, a screen asking whether to immediately perform the process to remove condensation is displayed. If you want to immediately start the process to remove condensation, press <Yes>.
9FCJ-0H2