<Special Processing>

Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.


For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.

<Waterdrop Pattern Prevention Mode>

(Settings/Register)

You can set <Waterdrop Pattern Prevention Mode> for when a splattered image, white patches, streaks, etc. appear on the halftone images of twosided print jobs. Immediately after you turn ON the machine in a low temperature environment, if the halftone reproduction of the printout becomes significantly different from the original document, set this mode to <On>.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Waterdrop Pattern Prevention Mode>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


If you set <Waterdrop Pattern Prevention Mode>, the printing speed for the first sheet becomes slower.

<Adjust Fixing Temperature>

(Settings/Register)

You can reduce image quality problems that occur due to an inappropriate fixing unit temperature by adjusting the fixing temperature.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Adjust Fixing Temperature>	<Low>, <Standard>, <High 1>, <High 2>	Yes	No	Yes	B	Settings/Registration Basic Information


Set this in the following cases. The print results may be improved. <Low>: Set this when the same unintended image is repeated, as indicated below. <High 1>: Set this when the toner of the printed images peels off. <High 2>: Set this when the improvements of <High 1> are insufficient. Set <Standard> to not use either setting. The printing speed is slower when <High 2> is set. Toner peeling may be able to be improved without changing this setting, by changing the paper type and usage environment.

Set this in the following cases. The print results may be improved.

<Low>: Set this when the same unintended image is repeated, as indicated below.

<High 1>: Set this when the toner of the printed images peels off.

<High 2>: Set this when the improvements of <High 1> are insufficient.

Set <Standard> to not use either setting.

The printing speed is slower when <High 2> is set.

Toner peeling may be able to be improved without changing this setting, by changing the paper type and usage environment.

<Curl Prevention Mode>

(Settings/Register)

You can set <Curl Prevention Mode> to reduce curling on the end of paper due to the heat and pressure of the fixing unit during printing.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Curl Prevention Mode>	<Mode 1>: <On>, <Off> <Mode 2>: <On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


If this setting is set to <On>, it may affect the printing quality. If setting <Mode 1> to <On> does not reduce curling, set <Mode 2> to <On>. If setting both <Mode 1> and <Mode 2> does not reduce curling, set <Mode 1> and <Mode 2> to <Off> and set <Switch Paper Feed Method> to <Print Side Priority>.

<Paper Slipping Prevention Mode>

(Settings/Register)

Paper may not be fed correctly when printing or print quality may be reduced, depending on the usage environment.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Paper Slipping Prevention Mode>	<Off>, <Mode 1>, <Mode 2>	Yes	No	Yes	B	Settings/Registration Basic Information


<Mode 1> : Set this when printing documents with large amounts of images or text on each page. However, the print speed will be slower. <Mode 2> : Set this when printing documents with small amounts of images or text on each page. The print speed will not be reduced as much as <Mode 1>. <Off>: Set this when you do not want the print speed to be reduced. However, the print quality will not be improved.

<Mode 1> : Set this when printing documents with large amounts of images or text on each page. However, the print speed will be slower.

<Mode 2> : Set this when printing documents with small amounts of images or text on each page. The print speed will not be reduced as much as <Mode 1>.

<Off>: Set this when you do not want the print speed to be reduced. However, the print quality will not be improved.

<Auto Clean Secondary Transfer Roller>

(Settings/Register)

The secondary transfer roller is cleaned after executing a print job with free size specified. Set this when the back side of the paper is dirty.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Auto Clean Secondary Transfer Roller>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information

<White Streak Prevention Mode>

(Settings/Register)

White streaks may appear in the printed image. This setting may improve this problem.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<White Streak Prevention Mode>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


When set to <On>, the print density will be lighter.

<Correct Fixing When Using Plain Paper>

(Settings/Register)

Smudges may appear in the printed image, depending on the paper type and usage environment. This setting may improve this problem.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Correct Fixing When Using Plain Paper>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


When set to <On>, the print speed will be slower.

<Correct Tail End Fixing When Using Plain Paper>

(Settings/Register)

Colors may become darker at the tail end of printed images because toner is insufficiently fixed. This setting may improve this problem.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Correct Tail End Fixing When Using Plain Paper>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


When set to <On>, the print speed will be slower.

<Plain Paper Fill Area Image Adjustment Mode>

(Settings/Register)

The finish quality may be able to be improved by enabling this setting when using plain paper with a smooth surface.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Plain Paper Fill Area Image Adjustment Mode>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


If you set this setting to <On> when using plain paper without a smooth surface, fixing problems may occur.

<Heavy Paper Fill Area Image Adjustment Mode>

(Settings/Register)

The finish quality may be able to be improved by enabling this setting when using heavy paper without a smooth surface.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Heavy Paper Fill Area Image Adjustment Mode>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


If you set this setting to <On> when using paper with a smooth surface, fixing problems may occur.

<Envelope Sealing Prevention Mode>

(Settings/Register)

You can set <Envelope Sealing Prevention Mode> to prevent the glue on envelope flaps from melting and sealing due to the heat and pressure of the fixing unit during envelope printing.

Item	Setting Description	DeviceAdmin	NetworkAdmin	Can be set in Remote UI	Import All Function	Name of Item When Exporting with the Remote UI
<Envelope Sealing Prevention Mode>	<On>, <Off>	Yes	No	Yes	B	Settings/Registration Basic Information


This setting is only enabled during envelope printing. If this setting is set to <On>, the quality of the image may be adversely affected.