<Preferences> <Timer/Energy Settings><Timer/Energy Settings>
This section describes the timer settings and energy settings.
<Date/Time Settings>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>Setting the current date and time is very important. For instructions on how to configure the setting, see Setting the Date/Time.
<Time Format>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set whether to display the time in 24-hour notation or 12-hour notation.
 |
You can also specify to automatically synchronize the date and time with a server on the network using SNTP. Making SNTP Settings |
<Quick Startup Settings for Main Power>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>If you set this function to <On>, you can reduce the time it takes until you can perform operations on the screen after the power is turned ON.
|
When this function is enabled Standby power is consumed even when the power is turned OFF. A tone sounds when the machine is turned ON, or when the machine is turned OFF if you set <Sleep Mode Tone> to <On>. (However, the machine may not be able to start up quickly and the tone may not sound, depending on the status of the machine.) Even if this function is set to <On>, the machine does not startup quickly in the following situations: When any of the network settings below are set to 'On' Wi-Fi When turning ON the main power of the machine after turning OFF the main power in any of the conditions below More than 110 hours have elapsed after quick startup Operating jobs Jobs are reserved Backing up data Accessing to the machine via network After specifying settings which require restarting the machine Error is occurred Using the Limited Functions mode The power cord is disconnected after turning OFF the main power MEAP applications which do not support quick startup are installed on the machine When turning ON the main power of the machine in 20 seconds after turning OFF the main power When turning ON the main power of the machine after eight hours have passed since the machine was turned OFF When turning ON the main power of the machine after turning OFF the main power from the Remote UI |
<Auto Reset Time>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can specify the time period in which you are logged out and the display returns to the default setting automatically.
|
If the login service is being used, the machine automatically logs out the user when the Auto Reset Time elapses. The screen displayed after the Auto Reset initiates differs depending on the following settings. Setting 1: The settings in <Function After Auto Reset> When <Default Function> is set, the screen specified in <Default Screen After Startup/Restoration> (Setting 2) is displayed. When <Selected Function> is set, the function before the Auto Reset initiates is displayed. (The specified settings and entered values for each function will be cleared.) However, the <Selected Function> settings may not be correctly reflected, and the screen specified in <Default Screen After Startup/Restoration> may be displayed. Setting 2: The settings in <Default Screen After Startup/Restoration> |
<Restrict Auto Reset Time>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>If you set this function to <On>, general users become unable to set <Auto Reset Time> and <Function After Auto Reset>.
<Function After Auto Reset>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set whether the default screen set for <Default Screen After Startup/Restoration> in <Display Settings> or the immediately previous screen is displayed at startup after the Auto Reset initiates.
<Auto Shutdown Time>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>With the Auto Shutdown, if the display of the machine is idle for a certain period of time after it has entered the Sleep mode, the machine automatically shuts down.
 |
Even when operating the machine from the Remote UI, the machine automatically shuts down if the control panel of the machine is idle for a certain period of time. A malfunction may occur particularly if the machine automatically shuts down while importing. Set <Auto Shutdown Time> to <0> when importing data. |
|
The Auto Shutdown may not be performed, depending on the usage conditions of the machine. |
<Auto Shutdown Weekly Timer>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set the time that the machine automatically shuts down each day of the week. If you use this function, you do not have to shut down the machine manually every day.
|
If both <Auto Shutdown Time> and <Auto Shutdown Weekly Timer> are set, priority is given to <Auto Shutdown Time>. |
<Allow Sleep Mode During Error>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set whether the machine enters the Auto Sleep mode when an error has occurred.
|
Disable this setting to prevent the machine from entering the Sleep mode. |
<Auto Sleep Time>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set the time until the machine automatically enters the Sleep mode if no operations are performed.
|
It is recommended that you use the default setting for this item. |
<Sleep Mode Energy Use>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set the amount of energy that the machine consumes when it is in the Sleep mode.
|
If the machine is connected to a computer using a USB cable, depending on the timing for entering the sleep mode, the machine may be unable to receive data correctly. Reactivate the machine from the sleep mode, then execute the job again. The energy consumption level may be the same as when <High> is set even when <Low> is set, depending on the status of the machine. |
|
If the energy consumption level is set to <Low>, communication failure may occur, depending on the network utility software you are using. To avoid this, press the Energy Saver key to cancel the Sleep mode before using the machine. If you select <Low>, energy consumption in the Sleep mode is low, but it takes longer to recover from the Sleep mode. |
<Settings for Sleep Mode Exit upon Job RX>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set whether to keep the control panel in the sleep mode when a print job is received.
|
If you select <Turn Device Control Panel On> in <Settings for Sleep Mode Exit upon Job RX>, power consumption is higher than when <Do Not Turn Device Control Panel On> is selected. |
<Auto Sleep Weekly Timer>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set the time that the machine automatically enters the Sleep mode each day of the week.
|
If you set both the <Auto Sleep Time> and <Auto Sleep Weekly Timer>, the <Auto Sleep Time> setting is given priority. |
<Time Settings for Auto Adjust Gradation>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can automatically perform the automatic gradation adjustment at a set time every day.
<Sleep Mode Exit Time Settings>
<Set> <Preferences> <Timer/Energy Settings>
<Preferences> <Timer/Energy Settings>You can set the time for recovering from the Sleep mode.