[Adjust Image Quality]
Use this setting to adjust the image quality or print position and for special processing according to the paper used.
* Values in bold red text are the default settings for each item.
* Values in bold red text are the default settings for each item.
[Adjust Copy Image]
[Menu] 
[Adjustment/Maintenance] [Adjust Image Quality]
[Adjustment/Maintenance] [Adjust Image Quality]Adjust the gradation and density for copying. Calibrating the Gradation of Copy Images
[Printer Density]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Adjustment/Maintenance] [Adjust Image Quality]If printed text or fine lines appear faded, adjust the density. Adjusting the Print Density
9 levels |
[Toner Save]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Adjustment/Maintenance] [Adjust Image Quality]Specify whether to adjust the print quality to save toner.
To give priority to print quality, select [Off].
To give priority to print quality, select [Off].
[Off] [On] |
[Black Text Processing for Color]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Adjustment/Maintenance] [Adjust Image Quality]When you are scanning originals in color, make adjustments to give priority to reproducing color text that is close to black or making black text easier to see. Adjusting the Reproducibility of Near Black Color Text
[Feeder] 7 levels [Platen Glass] 7 levels |
[Adjust Print Position]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Adjustment/Maintenance] [Adjust Image Quality]Adjust the print position if text or images are printed off-center or outside the printable range. Adjusting the Print Position
[Multi-Purpose Tray] [Adjust Vertically (Front Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Horizontally (Front Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Vertically (Back Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Horizontally (Back Side)] -5.0 to 0.0 to +5.0 (mm) [Drawer 1] [Adjust Vertically (Front Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Horizontally (Front Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Vertically (Back Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Horizontally (Back Side)] -5.0 to 0.0 to +5.0 (mm) [Drawer 2]*1 [Adjust Vertically (Front Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Horizontally (Front Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Vertically (Back Side)] -5.0 to 0.0 to +5.0 (mm) [Adjust Horizontally (Back Side)] -5.0 to 0.0 to +5.0 (mm) |
*1 May not be displayed depending on the model, the installed options, and other settings. |
[Special Processing]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Adjustment/Maintenance] [Adjust Image Quality]Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
[Special Processing]
[Special Processing]
[Remove Streaks from Scan Area]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Adjustment/Maintenance] [Adjust Image Quality]Specify whether stained areas are omitted from scanning when streaks are detected during feeder use.
* Note that if soiled areas are not scanned, images and text in soiled areas will also not be scanned. If streak-shaped unscanned areas appear when scanning originals with this set to [On], clean the feeder. Cleaning the Feeder
[Off] [On] |