Inserting and Removing a USB Memory Device

You can insert a USB memory device into the machine to exchange data between the machine and the USB memory device.
Use the control panel to safely remove the USB memory device from the machine.
You can use a USB memory device with a FAT16 (up to 2 GB) or FAT32 (up to 32 GB) file system.
Saving Data to a USB Memory Device
Data may not be able to be saved properly depending on the USB memory device.
Unsupported Devices
USB memory devices with a security function
USB memory devices that do not conform to USB standards
USB card readers
USB memory devices connected via an extension cable
USB memory devices connected via a USB hub
Handling USB Memory Devices
Do not remove the USB memory device or subject it to shocks or vibration or turn OFF the machine while data is being imported or exported.

Inserting a USB Memory Device

Confirm the orientation of the USB memory device, and insert it into the USB port on the front of the machine.
Confirm the Orientation of the USB Memory Device before Inserting
Make sure that the USB memory device is correctly oriented before inserting it into the USB port on the machine. If you attempt to insert it in the incorrect orientation, the memory device and the machine may be damaged.

Removing the USB Memory Device

Use the control panel to eject the USB memory device from the machine. You cannot eject the memory device using Remote UI from a computer.
Follow the Procedure to Remove the USB Memory Device
If you do not remove the USB memory device while following the procedure, the memory device and the machine may be damaged.
1
On the control panel, press [Status Monitor] in the [Home] screen or other location. [Home] Screen
The [Status Monitor] screen is displayed.
2
Press [Rmv. Mem. Media].
3
Make sure that [The memory media can be safely removed.] is displayed, and then remove the USB memory device.
965L-03W