Restricting Use of Remote UI
While Remote UI is convenient for operating the machine from a computer, it also poses a risk of third-party access to the machine.
You can configure the setting to require users to enter a PIN (Remote UI Access PIN) when using Remote UI to prevent unauthorized access by a third party.
If you do not use Remote UI, it is recommended that you disable the function.
You can configure the setting to require users to enter a PIN (Remote UI Access PIN) when using Remote UI to prevent unauthorized access by a third party.
If you do not use Remote UI, it is recommended that you disable the function.
Setting the PIN to Use for Remote UI
You can restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
This setting is not required when using Department ID Management, as Department ID authentication is performed.
This setting is not required when using Department ID Management, as Department ID authentication is performed.
This section describes how to configure the settings using the control panel.
You can also configure the settings using Remote UI from a computer after the Remote UI Access PIN has been set on the machine. Managing the Machine from a Computer (Remote UI)
Administrator privileges are required.
You can also configure the settings using Remote UI from a computer after the Remote UI Access PIN has been set on the machine. Managing the Machine from a Computer (Remote UI)
Administrator privileges are required.
1
On the control panel, press [Menu] in the [Home] screen. [Home] Screen
2
Press [Management Settings] 
[Remote UI Settings/Update Firmware] [Remote UI Settings] [Restrict Access].
[Remote UI Settings/Update Firmware] [Remote UI Settings] [Restrict Access].The [Restrict Access] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. System Manager ID and PIN
3
Set [Restrict Access] to [On], enter the Remote UI Access PIN, and press [Apply].
4
Enter the same number, and press [Apply].
The settings are applied.
|
When [Management Settings] of the Settings Menu Is InitializedUse the settings menu on the control panel to reset the Remote UI Access PIN. [Restrict Access] |
Disabling Remote UI
You can disable Remote UI to reduce the risk of unauthorized access to the machine via the network.
Use the control panel to configure the settings. You cannot configure the settings using Remote UI from a computer.
Administrator privileges are required. The machine must be restarted to apply the settings.
Administrator privileges are required. The machine must be restarted to apply the settings.
1
On the control panel, press [Menu] in the [Home] screen. [Home] Screen
2
Press [Management Settings] [Remote UI Settings/Update Firmware] [Remote UI Settings] [Remote UI].
[Remote UI Settings/Update Firmware] [Remote UI Settings] [Remote UI].The [Remote UI Settings] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. System Manager ID and PIN
3
Set [Use Remote UI] to [Off], and press [Apply] [OK].
[OK].4
Restart the machine. Restarting the Machine
The settings are applied.