Check whether the paper in the machine is usable, and replace it with appropriate paper, as needed.
Usable Paper
Loading Paper
Text or Images Are Blurry
Troubleshoot by checking the following steps:
Step 1: Checking the Paper
Are You Using Appropriate Paper?
Is the Paper Stained According to the Paper Type or Usage Environment?
Setting [Correct Blurry Image] to [Mode 1] may solve the problem. If that does not work, try specifying [Mode 2], [Mode 3] and then [Mode 4] in sequence.
[Home] screen on the control panel  [Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Correct Blurry Image] select the mode |
* Enabling this setting may lower the print density or slow down printing. It may also make outlines less distinct or make them slightly rougher.
Is the Paper Stained During Copying According to the Paper Type or Usage Environment?
Setting [Correct Blurry Image for Copy] to [Mode 1] may solve the problem. If that does not work, try selecting [Mode 2] and then [Mode 3].
[Home] screen on the control panel [Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Correct Blurry Image for Copy] select the mode |
* When this setting is enabled, the print density may decrease.
Step 2: Checking the Usage Environment of the Machine
Are You Using the Machine in an Environment with Sudden Temperature Changes?
Sudden temperature changes can create condensation, which can result in faded or blurry images and text. Setting [Control Condensation] to [On] may solve the problem.
[Home] on the control panel [Menu] [Adjustment/Maintenance] [Maintenance] [Control Condensation] [On] |
* During condensation removal, a blank sheet of paper may be output without being printed correctly. If you set this to [On], you can set whether to restrict printing.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation. The automatic shutdown setting is disabled.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation. The automatic shutdown setting is disabled.
Are You Using the Machine in an Environment with Low Humidity?
Setting [Low Humidity Mode] to [Mode 1] may solve the problem. If that does not work, specify [Mode 2].
[Home] screen on the control panel [Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Low Humidity Mode] [Mode 1] or [Mode 2] |
* Setting this to [On] may reduce the density or create fading in a humid environment.