Starting/Stopping Applications

This section describes the procedure for creating a task to start/stop applications installed in printers.
Creating a Task to Start Applications
Creating a Task to Stop Applications

Creating a Task to Start Applications

NOTE
The printers automatically restart if a login application was started in the task for starting applications.
1
Select the [Tasks] menu > [Task List].
2
Click [Create].
3
Click [[Application] Start].
4
On the [Scheduled] tab, configure the basic information and schedule of the task.
For details, see the following.
Creating Tasks
5
On the [Task-Specific Settings] tab, select the target applications for the task.
To start the selected applications on all the printers where they are installed, select [Start the selected applications on all printers on which they are installed].
To start a login application, select the login application to start in [Select Login Application].
Only one login application can be selected.
To start applications, select the applications to start in [Select Applications].
Select the version of the applications to start.
Select [All versions] or select the version to start in [Version].
6
On the [Targets] tab, set the target printers and device groups.
For details, see the following.
Creating Tasks
NOTE
The [Targets] tab is not displayed when [Start the selected applications on all printers on which they are installed] is selected on the [Task-Specific Settings] tab.
7
Click [Add].
Select the [Tasks] menu > [Task List] to check the information of the registered tasks.
For details, see the following.
Managing Created Tasks
Select the [Tasks] menu > [History] to check the status of tasks that are executing or have finished executing.
For details, see the following.
Checking the Task Execution Results

Creating a Task to Stop Applications

NOTE
A login application cannot be selected as the target of a task for stopping applications. To stop a login application, use a task for starting applications to start another login application. The login applications other than the started login application are stopped.
1
Select the [Tasks] menu > [Task List].
2
Click [Create].
3
Click [[Application] Stop].
4
On the [Scheduled] tab, configure the basic information and schedule of the task.
For details, see the following.
Creating Tasks
5
On the [Task-Specific Settings] tab, select the target application of the task.
To stop the selected applications on all the printers where they are installed, select [Stop the selected applications on all printers on which they are installed].
In [Select Applications], select the applications to stop.
Select the version of the applications to stop.
Select [All versions] or select the version to stop in [Version].
6
On the [Targets] tab, set the target printers and device groups.
For details, see the following.
Creating Tasks
NOTE
The [Targets] tab is not displayed when [Stop the selected applications on all printers on which they are installed] is selected on the [Task-Specific Settings] tab.
7
Click [Add].
Select the [Tasks] menu > [Task List] to check the information of the registered tasks.
For details, see the following.
Managing Created Tasks
Select the [Tasks] menu > [History] to check the status of tasks that are executing or have finished executing.
For details, see the following.
Checking the Task Execution Results

Find manuals for other products
iW Enterprise Management Console Version 4.1.4
User's Guide (Product Manual)
USRMA-9001-002023-07Copyright CANON INC. 2023