[Remote Fax TX Settings]

Configure the Remote Fax client functions.
* Values in red text indicate the default setting for each item.
[Remote Fax Server Address]
[TX Timeout]
[No. of TX Lines]
[Select Priority Line]
[Use IP Fax]
[IP Fax Communication Mode Settings]
[Remote Fax Server Address]
[ Settings/Registration] [Function Settings] [Send] [Fax Settings] [Remote Fax TX Settings]
Set the IP address or host name of the Remote Fax server machine.
[TX Timeout]
[ Settings/Registration] [Function Settings] [Send] [Fax Settings] [Remote Fax TX Settings]
Set the amount of time until timeout occurs when there is no response from the Remote Fax server machine after you send a fax.
If the Remote Fax server machine does not respond within the time set for TX timeout, the Remote Fax job is canceled.
1 to 24 to 99 hr. (in 1 hour increments)
[No. of TX Lines]
[ Settings/Registration] [Function Settings] [Send] [Fax Settings] [Remote Fax TX Settings]
Set the number of lines that can be selected when you send remote faxes. Set the number of lines to the same number of telephone lines connected to the Remote Fax server machine.
1 to 4 lines
[Select Priority Line]
[ Settings/Registration] [Function Settings] [Send] [Fax Settings] [Remote Fax TX Settings]
Specify the line to use when you send remote faxes.
[Auto], [Line 1] to [Line n]*1
*1Displayed according to the number of lines set in [No. of TX Lines].
[Use IP Fax]
[ Settings/Registration] [Function Settings] [Send] [Fax Settings] [Remote Fax TX Settings]
Set whether to use IP faxes.
[On], [Off]
[IP Fax Communication Mode Settings]
[ Settings/Registration] [Function Settings] [Send] [Fax Settings] [Remote Fax TX Settings]
Specify the communication mode to use when you send IP faxes.
[Use Intranet]
[On], [Off]
[Use VoIP Gateway]
[On], [Off]
A08C-207