Configuring the Personal Authentication Management Settings
The User Authentication login service performs personal authentication based on the information registered for each user, enabling you to limit the users who can access the machine. User information registration (authentication) can be performed on this machine and on an external server. You can configure the authentication system to use only this machine as the authentication device, or you can additionally specify an Active Directory, Microsoft Entra ID or LDAP authentication server on the network as an authentication device to utilize the existing user information registered on the server (Authentication Device). For the user login method, you can enter authentication information (Login Method). Before configuring the user authentication settings, decide the authentication device and login method. Configuring Personal Authentication Management with User Authentication
Authentication Device
The authentication devices described below can be used for personal authentication management. Each type of authentication device requires a different environment and settings. Confirm your system environment before configuring. System Specifications
Local Device (This Machine)
User information is managed on the database inside the machine. User information is registered and edited via the Remote UI. When the local device is configured as a standalone authentication device, Department ID Management can also be performed at the same time. Registering User Information in the Local Device
Active Directory/Microsoft Entra ID/LDAP Server
In addition to the local device, you can specify an LDAP server or Windows Server with Active Directory or Microsoft Entra ID installed as the authentication device. One advantage of using this type of device is that the users registered on the server can be added as general users without any changes. To provide administrator privileges to a user, the user must be assigned to a specific administrator group on the Active Directory, Microsoft Entra ID or LDAP server. To specify the additional authentication device, you must register the information of the server used for authentication.Registering Server Information
Login Method
The user login methods described below are available for personal authentication management.
Keyboard Authentication (Remote UI Only)
 | With this method, users log in by entering a user name and password. This method is available regardless of the authentication device that is used. |
 |
Users cannot log in from the control panel of the machine with a user name and password. |
Configuring Personal Authentication Management with User Authentication
Configure the personal authentication management settings in the order described below.
 |  | Check the basic configuration. Is the machine properly connected to the computer? Setting up the Network Environment If you are using an authentication server, have the DNS settings been configured for the machine? If you are using an authentication server, have the date and time been properly set? Setting the Date/Time | ||
 | ||||
 |  | Check the login service. Log in to the Remote UI with Administrator privileges, click [Settings/Registration]  [User Management] [Authentication Management] [Authentication Service Information], and check that the login service is indicated as User Authentication. | ||
| ||||
 |  | Configure the authentication server settings. Register user information on the local device and specify the authentication server. | ||
| ||||
 |  | Select the user authentication system. |
 |
Make sure to log out after you finish using the Remote UI. If you close the Remote UI without logging out, it may take a long time to log in next time. |