How to Operate the Control Panel (Touch Panel Model)

The control panel uses a touchscreen. Directly touch your finger to the buttons and items displayed on the screen to operate them.
To prevent accidental operations or damage to the control panel, avoid the following:
Pressing too hard with your fingers
Pressing with a sharp tip, such as a fingernail, ballpoint pen, or pencil
Operating with wet or dirty hands
Operating with an object on the display

Basic Touchscreen Operations (Tapping and Dragging)

Tapping
Gently touch the screen with your fingertip and quickly release. Do this when selecting items and performing operations.
In the User's Guide, "press" and "select" refer to the tapping operation.
Dragging
Move your fingertip while touching the screen, and release it at the desired position. You can scroll lists and move the area you are touching to a desired position.

Selecting Items

When you tap an item name or button, the item can be selected. The selected screen is displayed, or the selected function is performed.
To Cancel a Selection
Drag your fingertip touching the screen away from the selected item or button and release it.
To Return to the Previous Screen
Press on the control panel.

Scrolling the Screen

When a scroll bar is displayed, this means that there are some items or information which are not displayed on the screen. Press [] or [] to scroll the screen toward the pressed direction.

Set the value

Set the value [] / [] buttons

Tap [] or [] to specify a value. You can specify the value directly by using the numeric keys.
Tap [] or [] to move a cursor.

Set the value using the [+] and [-] buttons or the slider

Tap the [+] and [-] buttons to adjust the value. When the slider is displayed as shown below, you can drag it to the left or right to adjust the value.
A19U-02H