Changing the Fax Number and Unit Name
You can change the information registered to the machine such as when the fax number changes after a move or you want to change the name notified to the destination.
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Set Line]
Administrator privileges are required.
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Set Line]
Administrator privileges are required.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of Remote UI
3
Click [TX Settings] 
[Fax TX Settings] [Edit].
[Fax TX Settings] [Edit].The [Edit Fax TX Settings] screen is displayed.
4
Change the fax number and unit name.
Enter the fax number in [Unit Telephone Number] in [Set Line].
Enter the unit name in [Unit Name] in [Basic Settings].
5
Click [OK].
The settings are applied.
6
Log out from Remote UI.