[Maintenance]

Carry out maintenance to clean the machine.
* Values in bold red text are the default settings for each item.

[Clean Fixing Assembly]

[Menu] [Adjustment/Maintenance] [Maintenance]
Perform this operation to clean the fixing assembly if black streaks appear on printed paper following procedures such as toner cartridge replacement. Cleaning the Fixing Assembly

[Clean Drum]

[Menu] [Adjustment/Maintenance] [Maintenance]
If the printout is smudged, the drum may be dirty. Perform this operation to clean the drum. Cleaning the Drum

[Control Condensation]

[Menu] [Adjustment/Maintenance] [Maintenance]
In environments subject to sudden temperature changes, condensation may form and cause images and/or text to be faint or blurred. If so, specifying [On] may improve the print results.
During condensation removal, a blank sheet of paper may be output without being printed correctly. If you set this to [On], you can set whether to restrict printing.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation.
[Off]
[On]
[Allow Job Printing During Process]
[Do Not Allow Job Printing During Process]
A19C-05C