[Special Processing]

Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
* Values in bold red text are the default settings for each item.

[Special Paper Processing]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Specify special processing for the paper in the following situations:

If you are using special paper

To print on the back of printed paper

For paper with a rough surface

If the envelope flap is stuck down

If the paper curls during printing

[Manual Back Side Print (2-Sided Only)]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

[Special Paper Processing]

If you are using paper that has already been printed on, printing on the back side may appear faint. If this occurs, setting the paper source to [On] may improve the print results.

* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending on the operating environment humidity, changes in image quality may occur.

[Drawer 1]

[Off]

[On]

[Rough Surface Paper Mode]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

[Special Paper Processing]

if you are using paper with a rough surface, printed images may appear faint. If this occurs, setting the paper source to [On] may improve the print results.

* Specifying [On] in this setting may lead to slower print speeds or changes in the image quality.

[Drawer 1]

[Off]

[On]

[Envelope Flap Closing Prevention]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

[Special Paper Processing]

Depending on the type of envelope and the operating environment, the envelope flap may stick down during printing. If so, specifying [On] in this setting may reduce the likelihood of envelope flaps sticking down.

* If this is set to [On], the print may be faded because the toner is not fully fixed on the paper.

[Off]

[On]

[High Humidity Mode]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Printing in a high-humidity environment may cause uneven print density. If so, specifying [On] may improve the print results.

* Specifying [On] in this setting may lead to blurred images and/or text in low-humidity environments.

[Off]

[On]

[Low Humidity Mode]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Printing in a low-humidity environment may lead to blurred images and/or text. In this case, selecting [Mode 1] may improve the print results. If that does not work, try selecting [Mode 2] and then [Mode 3].

* Enabling this setting may reduce the density or create fading in a humid environment.

[Off]

[Mode 1]

[Mode 2]

[Mode 3]

[Reduce Ghosting 1]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

If you print on small-sized paper and then continue printing on a larger sized paper, ghost images may appear in the unprinted sections of the paper. In this case, selecting [On] in this setting may improve the print results.

* When you select [On], the printing speed may decrease.

[Off]

[On]

[Prevent Fogging]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

White (blank) areas in the printed image may be darkened. If so, specifying [On] may correct the problem.

* When you select [On], the print density may decrease.

[Off]

[On]

[Reduce Toner Flaking]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Depending on the paper type and operating environment, the toner in printed images may peel off. If so, specifying [Mode 1] in this setting may improve the print results. If this does not solve the problem, specify [Mode 2].

* Enabling this setting may result in ghosting in blank areas.

[Off]

[Mode 1]

[Mode 2]

[Correct Paper Conveyance]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Continuous printing may result in repeated paper jams. In this case, selecting [On] may reduce the frequency of paper jams.

* When you select [On], the printing speed may decrease.

[Off]

[On]

[Talc Paper Mode]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Printing in a high-temperature or high-humidity environment may cause white spots on a printed image. In this case, selecting [On] may improve the print results.

*When you select [On], the print quality may be affected.

[Off]

[On]

[Quiet Mode]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

If the operation sound during printing is loud, selecting [On] may reduce the operation sound.

* When you select [On], the printing speed will decrease.

[Off]

[On]

[Correct Blurry Image]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Smudges may appear on the printed paper. In this case, selecting [Mode 1] may improve the print results. If that does not work, try selecting [Mode 2].

* When this setting is enabled, the print density may decrease or the print speed may be slower.

[Off]

[Mode 1]

[Mode 2]

[Transfer Adjustment Mode]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Depending on the paper used, printing may appear uneven with printing in a humid environment. In this case, selecting [Mode 1] may improve the print results. If that does not work, try selecting [Mode 2].

* When this setting is enabled, the print density may vary in an environment with low humidity.

[Off]

[Mode 1]

[Mode 2]

[Reduce Faint Print After Replacing Cart.]

[Menu]

[Adjustment/Maintenance]

[Adjust Image Quality]

[Special Processing]

Print may be faded immediately after installing a new replacement toner cartridge. If so, specifying [On] in this setting may improve the print results. This setting takes effect the next time a toner cartridge is replaced.

* Specifying [On] will result in a longer delay than usual between replacing toner cartridge and being able to print.

[Off]

[On]