[Preferences] [Network] [TCP/IP Settings] [IPv4 Settings][TCP/IP Settings]
Specify the settings to use the machine on a TCP/IP network.
* Values in bold red text are the default settings for each item.
* Values in bold red text are the default settings for each item.
[IPv4 Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify the settings to use the machine in an IPv4 environment.
[IP Address Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]Set the IPv4 address either automatically or manually. Setting IPv4 Addresses
[Auto Acquire] [Select Protocol] [Off] [DHCP] [Auto IP] [Off] [On] [Manually Acquire]*1 [IP Address]: 0.0.0.0 [Subnet Mask]: 0.0.0.0 [Gateway Address]: 0.0.0.0 [Check Settings] |
*1 May not be displayed depending on the model and other settings. |
[PING Command]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]Execute a PING command to check whether the machine can connect to devices on the network. Checking Whether the Machine Can Connect to Network Devices
[DNS Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]Specify the DNS settings when using the machine in an environment with a Domain Name System (DNS) implemented. Configuring DNS
[DNS Server Settings] [Primary DNS Server]: 0.0.0.0 [Secondary DNS Server]: 0.0.0.0 [DNS Host Name/Domain Name Settings] [Host Name] [Domain Name] [DNS Dynamic Update Settings] [Off] [On] [DNS Dyn. Updt. Intrvl.] 0 to 24 to 48 (hr.) |
[mDNS Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]Specify the mDNS settings to use DNS functions in an environment such as Bonjour with no DNS installed.
[Off] [On] [mDNS Name] |
[DHCP Option Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]Specify the settings for using a DHCP server in an IPv4 environment with a Domain Name System (DNS) implemented. Configuring DNS
[Acquire Host Name] [Off] [On] [DNS Dynamic Update] [Off] [On] [Acquire DNS Server Address] [Off] [On] [Acquire Domain Name] [Off] [On] [Acquire WINS Server Address] [Off] [On] |
[IPv6 Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify the settings for using the machine in an IPv6 environment.
You can set multiple IPv6 addresses and use them at the same time. Setting IPv6 Addresses
You can set multiple IPv6 addresses and use them at the same time. Setting IPv6 Addresses
[Use IPv6]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]Configure whether to use IPv6.
[Off] [On] [Check Settings] |
[Stateless Address Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]Configure whether to use a stateless address.
[Off] [On] [Check Settings] |
[Use DHCPv6]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]Configure whether to use a stateful address obtained from a DHCP server using DHCPv6.
[Off] [On] [Check Settings] |
[DNS Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]Specify the DNS settings when using the machine in an environment with a Domain Name System (DNS) implemented. Configuring DNS
[DNS Host Name/Domain Name Settings] [Use IPv4 Host/Domain] [Off] [Host Name] [Domain Name] [On] [DNS Dynamic Update Settings] [Off] [On] [Regist. Manual Addr.] [Off] [On] [Regist. Stateful Addr.] [Off] [On] [Regist Stateless Addr.] [Off] [On] [DNS Dyn. Updt. Intrvl.] 0 to 24 to 48 (hr.) |
[mDNS Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]Specify the mDNS settings to use DNS functions in an environment such as Bonjour with no DNS installed.
[Off] [On] [Use IPv4 Name for mDNS] [Off] [mDNS Name] [On] |
[DHCP Option Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]
[Preferences] [Network] [TCP/IP Settings] [IPv6 Settings]Specify the settings for using a DHCP server in an IPv4 environment with a Domain Name System (DNS) implemented. Configuring DNS
[Acquire DNS Server Address] [Off] [On] [Acquire Domain Name] [Off] [On] |
[WINS Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Configure WINS (Windows Internet Name Service) when using the machine in a network environment that uses both NetBIOS and TCP/IP. Configuring WINS
[WINS Resolution] [Off] [On] [WINS Server Address]: 0.0.0.0 |
[LPD Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify whether to use the LPD protocol. Configuring LPD, RAW, or WSD
If the LPD protocol is used, you can also set the time from the start of reception standby, after print data reception is canceled, to the timeout.
If the LPD protocol is used, you can also set the time from the start of reception standby, after print data reception is canceled, to the timeout.
[LPD Print Settings] [Off] [On] [RX Timeout] 1 to 5 to 60 (min.) |
[RAW Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify whether to use the RAW protocol. Configuring LPD, RAW, or WSD
If the RAW protocol is used, you can also set the time from the start of reception standby, after print data reception is canceled, to the timeout.
If the RAW protocol is used, you can also set the time from the start of reception standby, after print data reception is canceled, to the timeout.
[RAW Print Settings] [Off] [On] [RX Timeout] 1 to 5 to 60 (min.) |
[WSD Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify whether to use the WSD protocol. You can specify this setting for each of the functions that use the WSD protocol. Configuring LPD, RAW, or WSD
[WSD Print Settings] [Use WSD Print] [Off] [On] [Use WSD Browsing] [Off] [On] [Use Multicast Discovery] [Off] [On] |
[IPP Print Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify whether to use IPP (Internet Printing Protocol). You can use IPP when printing with AirPrint. Setting the Functions and Security to Be Used with AirPrint
When using IPP, you can also specify whether TLS encryption is used for communication.
When using IPP, you can also specify whether TLS encryption is used for communication.
[Use IPP Printing] [Off] [On] [Allow IPP Printing Only When Using TLS] [Off] [On] |
[Use HTTP]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify whether to use HTTP. Disabling HTTP Communication
[Off] [On] |
[Port Number Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]Specify the port number for the protocol used in accordance with the port numbers for the computer, server or other device. Changing the Port Number
[LPD] 1 to 515 to 65535 [RAW] 1 to 9100 to 65535 [WSD Multicast Discovery] 1 to 3702 to 65535 [HTTP] 1 to 80 to 65535 [SNMP] 1 to 161 to 65535 |
[MTU Size]
[Menu] [Preferences] [Network] [TCP/IP Settings]
[Preferences] [Network] [TCP/IP Settings]If communication slows down due to the size of the packets sent, use this to change the maximum size for outgoing packets.
[1300] [1400] [1500] |