Settings/Registration] 
[Adjustment/Maintenance] [Adjust Action][Adjust Action]
Adjust the actions of the optional finisher and the machine's finishing functions.
* Values in red text indicate the default setting for each item.
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Action]
Settings/Registration] [Adjustment/Maintenance] [Adjust Action]Reposition the staples of the saddle stitch unit so that stapling can be performed. Remove any paper output to the booklet tray before performing this operation.
Perform this operation if stapling is not performed after you remove jammed staples or replace the staple case. When you perform this operation, the machine feeds paper to the saddle stitch unit and staples it several times.
Perform this operation if stapling is not performed after you remove jammed staples or replace the staple case. When you perform this operation, the machine feeds paper to the saddle stitch unit and staples it several times.
* This item is displayed only on machines with the option installed.
NOTE
Usable Paper
Plain paper
Any of the following paper sizes:
A3
B4
A4R
305 x 457 mm
Legal
Letter R
11" x 17"
If Unusable Paper Is Loaded in a Paper Source
Configure the settings to disable the use of that paper source. Using the Appropriate Paper Source for Each Function
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Action]
Settings/Registration] [Adjustment/Maintenance] [Adjust Action]Adjust the saddle stitch fold position and staple position so that they are at the center of the paper. Print a test page, check the current state of the fold position and the shift width on the test page, and then perform adjustment. Adjusting the Saddle Stitch Fold Position and Staple Position
* This item is displayed only on machines with the option installed.
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Action]
Settings/Registration] [Adjustment/Maintenance] [Adjust Action]Set whether to give priority to the speed or precision of the puncher.
* This item is displayed only on machines with the option installed.
[Speed Priority], [Precision Priority] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Action]
Settings/Registration] [Adjustment/Maintenance] [Adjust Action]Adjust the fold position for each paper size. Adjusting the Paper Fold Position
* This item is displayed only on machines with the option installed.
* The items displayed vary depending on the options that are installed. Options with Folding Functions
For 6100 Series (When the Finisher and Paper Folding Unit Is Installed)
For 6100 Series (When the Paper Folding Unit Is Installed)
For 6100 Series (When the Booklet Finisher Is Installed)
For 6100 Series (When the Paper Folding Unit Is Installed)
For 6100 Series (When the Booklet Finisher Is Installed)
[Adjust Z-Fold Position] -2.0 to 0.0 to +1.5 (mm) * In 0.5 mm increments [Adjust Saddle C-Fold Position] [A] 0.0 to 6.0 mm (mm) * In 0.5 mm increments [B] 0.0 to 3.0 mm (mm) * In 0.5 mm increments [Adjust C-Fold Position] -7.0 to -1.0 to +5.0 (mm) * In 0.5 mm increments [Adjust Accordion Z-Fold Position] -7.0 to -1.0 to +5.0 (mm) * In 0.5 mm increments [Adjust Double Parallel Fold Position] [A] -2.0 to -1.0 to +5.0 (mm) * In 0.5 mm increments [B] 0.0 to 1.0 to +5.0 (mm) * In 0.5 mm increments [Adjust Half Fold Position] -2.0 to 0.0 to 2.0 (mm) * In 0.5 mm increments [Adjust Saddle Fold Position] [Current State] [A Is Shorter], [A and B Are Equal], [B Is Shorter] [Shift Width (a)] 0.0 to 2.0 (mm) * In 0.1 mm increments |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Action]
Settings/Registration] [Adjustment/Maintenance] [Adjust Action]Set the amount of time until the machine automatically staples the paper bundle after it is inserted, when using manual stapling.
* This item is displayed only on machines with the option installed.
1 to 3 to 5 sec. |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Action]
Settings/Registration] [Adjustment/Maintenance] [Adjust Action]Adjust the amount of time to touch [
Start] on the control panel. When you touch the button for the set amount of time, the machine recognizes that the button is pressed, and the processing starts.
Start] on the control panel. When you touch the button for the set amount of time, the machine recognizes that the button is pressed, and the processing starts.-1 to 0 to +7 |