Specify the screen displayed after the start screen appears when the machine is turned ON and immediately after an Auto Reset. Setting this for the [Status Monitor] enables you to also specify the screen displayed immediately after the [Status Monitor] screen is closed.
[Home]
[Copy]
[Fax]*1
[Scan]
[Secure Print]
[Status Monitor]
[Home]
[Copy]
[Fax]*1
[Scan]
[Secure Print]
*1 May not be displayed depending on the model, the installed options, and other settings.
[Home Screen Button Display Settings]
[Menu] [Preferences] [Display Settings]
Add shortcut buttons and rearrange the buttons so that you can run frequently used functions more quickly from the [Home] screen of the operation panel. Customizing the [Home] Screen
[Select Button to Display]
[Favorite Copy Settings]
[Favorite Fax Settings]*1
[Favorite Scan Settings]
[Set Display Order]
*1 May not be displayed depending on the model, the installed options, and other settings.
[Language]
[Menu] [Preferences] [Display Settings]
Change the language shown on the operation panel and used in printed reports.
* Depending on your country or region, the [Language] setting may not be available, or its content or default setting may be different.
Specify whether a message is displayed to notify you if soiling is detected during feeder use.
[Off] [On]
[Millimeter/Inch Entry Switch]
[Menu] [Preferences] [Display Settings]
Change the units shown on the screen for entering length and width.
* Depending on your country or region, the [Millimeter/Inch Entry Switch] setting may not be displayed, or its content or default setting may be different.
[Millimeter]
[Inch]
[Display Timing for Cart. Prep.]
[Menu] [Preferences] [Display Settings]
When the toner in a toner cartridge runs low, a message appears notifying you to prepare a new toner cartridge. To manually specify when this message appears (the toner level in a cartridge), set [Auto] to [Off] and specify the timing in [Custom]. When [Auto] is set to [On], the machine automatically decides when to display the message.
[Auto]
[Off]
[Custom]
2 to 20 to 99 (%)
[On]
[Display Notif. to Clean Fixing Assembly]
[Menu] [Preferences] [Display Settings]
Select whether to notify you by displaying a message when the fixing assembly requires cleaning.
[Off]
[On]
[1000 to 50000]
[Show Warnings]
[Menu] [Preferences] [Display Settings]
Specify whether a notification message is displayed when a toner cartridge is low on toner.
* If the machine is configured to stop printing when a toner cartridge is low on toner, this cannot be set to [Off]. [Action When Warning]
* If the machine is configured not to print incoming faxes and I-Faxes when a toner cartridge is low on toner, the message appears even when this is set to [Off]. [Continue Print. When Cart. Low]
[Off]
[On]
[Action When Warning]
[Menu] [Preferences] [Display Settings]
Specify whether to continue printing when a toner cartridge is low on toner. If this is set to [Stop Printing], a notification message appears when the toner cartridge runs low on toner. [Show Warnings]
[Low Cartridge Level]
[Continue Printing]
[Stop Printing]
[Display IP Address]
[Menu] [Preferences] [Display Settings]
Specify whether to display the machine’s IPv4 address in the [Status Monitor] screen. [Status Monitor] Screen
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.