Settings/Registration] 
[Function Settings] [Common] [Paper Output Settings][Paper Output Settings]
Configure the settings for the paper output operations.
* Values in red text indicate the default setting for each item.
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Set which functions use each output tray as the output destination. Also specify the output tray priority when multiple trays are to be used for the output of the same function. Output Destination Settings
* This item is displayed only on machines with the option installed.
[Tray Home Position]*1 [Tray A], [Tray B], [Tray C], [Off] [Tray A] [Copy], [Access Stored Files], [Printer], [Receive], [Other], [IP Fax 1], [Fax 1], [Fax 2] [Tray B] [Copy], [Access Stored Files], [Printer], [Receive], [Other], [IP Fax 1], [Fax 1], [Fax 2] [Tray C] [Copy], [Access Stored Files], [Printer], [Receive], [Other], [IP Fax 1], [Fax 1], [Fax 2] [Tray D]*1 [Copy], [Access Stored Files], [Printer], [Receive], [Other], [IP Fax 1], [Fax 1], [Fax 2] |
*1This item may not be displayed depending on the model.
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]You can fix the tray designation settings when the machine has multiple output trays.
The tray order to which prints are output is fixed as follows: Tray B → Tray A → Tray C (if available).
The tray order to which prints are output is fixed as follows: Tray B → Tray A → Tray C (if available).
* This item is displayed only on machines with the option installed.
[On], [Off] |
IMPORTANT
When you specify [On] in this setting, the effects of the factors below may result in problems such as pages not being output to the tray correctly or falling out of the tray.
Temperature and humidity
Paper characteristics and curling
Stacks of sheets that exceed the printer's specifications (Depending on the paper used and the function settings, the number of sheets stacked in the tray could exceed the specified limits.)
NOTE
You cannot configure this setting when [Limited Function Mode] is set to [On].
If the output destination tray reaches its full capacity, jobs other than the current job (No Collating) are stopped. The jobs restart once you have removed all the paper in the tray.
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Set whether to offset the paper output for each set of print data.
* This item is displayed only on machines with the option installed.
[On], [Off] |
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Set whether to sort by inserting the specified paper at the start of the print data.
[On], [Off] [Change] Paper source selection |
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Configure the settings to sort by inserting paper between each specified number of copies.
The machine inserts paper when you print using the Collate (Page Order), Offset, or Staple settings.
The machine inserts paper when you print using the Collate (Page Order), Offset, or Staple settings.
[On], [Off] [Change] Paper source selection [Number of Copies] 1 to 10 to 9999 |
NOTE
Paper is not inserted in the following cases:
When the Group (Same Pages), Group Sort, Booklet, Saddle Stitch, or Fold settings are configured
When you are using tab paper
* The available functions and usable paper vary depending on the model and options.
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Configure the setting to output different sized papers to the same output tray of the finisher.
* This item is displayed only on machines with the option installed.
[On], [Off] |
NOTE
If you set [Different Paper Sizes for Output Tray] to [Off], printing may stop when the message [Remove the paper from the output tray.] appears. To resume printing, remove all of the paper from the output tray.
If you set both the Different Size Originals and Staple modes, outputs are stapled and collated, regardless of the Different Paper Sizes settings.
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Set whether to align the output paper by paper width when paper with different width is used for printing.
If you set [Align Output Paper of Diff. Sizes (Diff. Widths)] to [On], the machine automatically suspend the print job when paper with different width is output so that you can remove the output paper.
If you set [Align Output Paper of Diff. Sizes (Diff. Widths)] to [On], the machine automatically suspend the print job when paper with different width is output so that you can remove the output paper.
* This item is displayed only on machines with the option installed.
[On], [Off] |
IMPORTANT
If you use paper smaller than A5R, the output paper cannot be aligned.
NOTE
When [Align Output Paper of Diff. Sizes (Diff. Widths)] is set to [On], printing stops temporarily if all of the available output trays have reached their stacking limits. If you remove the output paper from the trays, the trays move upward and printing resumes.
Even when [Align Output Paper of Diff. Sizes (Diff. Widths)] is set to [Off], you can align output paper if you are using paper with the same width.
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Set whether to forcibly output excess tab paper, when using tab paper.
When you select [On], the machine forcibly outputs the excess tab paper for each copy.
When you select [On], the machine forcibly outputs the excess tab paper for each copy.
Example:
If you are using sets of tab paper that each consist of five sheets, and one copy requires seven sheets of tab paper, load two sets of tab paper in the paper source. In this case, a total of 10 sheets of tab paper are loaded in the paper source. However, since only seven sheets of tab paper are required, the machine will output the remaining three sheets of tab paper.
If you are using sets of tab paper that each consist of five sheets, and one copy requires seven sheets of tab paper, load two sets of tab paper in the paper source. In this case, a total of 10 sheets of tab paper are loaded in the paper source. However, since only seven sheets of tab paper are required, the machine will output the remaining three sheets of tab paper.
[On], [Off] |
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Set the actions that the machine performs when there are too many sheets to staple.
* This item is displayed only on machines with the option installed. The available functions vary depending on the options.
[Corner/Double] [Print without Stapling], [Cancel Printing] [Saddle Stitch] [Print without Stapling], [Cancel Printing] [Eco (Staple-Free)] [Print without Stapling], [Cancel Printing] |
[ Settings/Registration] [Function Settings] [Common] [Paper Output Settings]
Settings/Registration] [Function Settings] [Common] [Paper Output Settings]Set whether to offset the paper output for single-sheet print jobs when offset is specified or when printing multiple copies.
* This setting is disabled for copying.
* This item is displayed only on machines with the option installed.
[On], [Off] |