Settings/Registration] 
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing][Special Processing]
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
* Values in red text indicate the default setting for each item.
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Set this item for when a splattered image, white patches, streaks appear on the halftone images of two-sided print jobs.
* If you set this to [On], the printing speed may become slower.
[On], [Off] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]If toner is lightly applied to an unprinted area (white area), you may be able to correct it by setting this item.
* If [Mode 1] is set, the correction effects becomes weaker, and it becomes stronger if [Mode 2] is set. However, the toner density on the output may become lighter when [Mode 2] is set.
[Off], [Mode 1], [Mode 2] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]When printing on envelopes, if their flaps are glued (which they should not be) or toner fixation is poor, you can adjust the fixing level.
If the envelope flap is glued, set the fixing level to [Low].
If toner is not fixed to envelopes well enough, set the fixing level to [High].
[Low], [Standard], [High] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Set this item to improve the print result when the image is faint because insufficient toner is fixed to the paper.
[On], [Off] |