Original Size Setting
Set the size according to the placed original.
Setting the Original Size
When a part of the custom size original or part of the image on the edge of the original is missing after being scanned, set the size of the placed original manually.
* If the paper size set on the receiving side is smaller than the size of the scanned original, the size may be reduced to match the paper size on the receiving side, or the data may be divided and sent.
1
On the fax screen, press the setting button for the original size. Fax Screen
The [Scan Size] screen is displayed.
2
Select the size of the placed original.
Depending on the setting, the location where to place the original may be restricted to the platen glass or feeder. If the original is placed in a different location, place it in the listed location. Placing Originals
When Placing a Custom Size Original
Enter the size (length of sides) of the original to set.
1
Press [Custom].
If you do not know the size (length of sides) of the placed original, press [Free Size]. In this case, you do not need to perform Step 2 (enter the length of sides).
* If you select [Free Size], the original can only be placed in the feeder.
2
Enter the length of the sides for [X] and [Y], and press [OK].
Press [X] and [Y] to select them, and enter the values.
When frequently used original sizes are registered, you can call them up by pressing [Registered Size 1] to [Registered Size 5].
Registering the Size of an Original
Follow the procedure below to register sizes when you frequently use specific non-standard size originals. You can call up the size on the size input screen, saving you the trouble of entering the size each time.
You can register up to five sizes for originals.
You can register up to five sizes for originals.
Press [Register Size]  select the button to which you want to register the size press [Register/Edit] enter lengths for the [X] side and [Y] side press [OK] [Close] |
* On the size registration screen, you can select a button and press [Rename] to rename the button.
When Placing a Long Original
Select [Long Original].
* If this is set to [Long Original], the original can only be placed in the feeder.
* For details on the size of long originals that can be placed in the feeder, see the specifications for the feeder of the machine. 2-Sided Single Pass Feeder Specifications
When Scanning Originals of a Special Size Such As OFICIO 
Press [Other Size], and select the paper size.
3
Press [OK].
The fax screen is displayed again.