Settings/Registration] 
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing][Special Processing]
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
* Values in red text indicate the default setting for each item.
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Set this item for when a splattered image, white patches, streaks appear on the halftone images of two-sided print jobs.
* If you set this to [On], the printing speed may become slower.
[On], [Off] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Set this to [On] if print density is uneven in a way that the print looks like a water drops pattern.
[On], [Off] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Reduce image quality problems by adjusting the fixing temperature.
[Low]: Set this when the same unintended image is repeated.
[High 1]: Set this when the toner of the printed images peels off.
[High 2]: Set this when the improvements of [High 1] are insufficient. The printing speed is slower when [High 2] is set.
[Low], [Standard], [High 1], [High 2] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Reduce curling on the end of paper due to the heat and pressure of the fixing unit during printing.
* If this setting is set to [On], the printing speed decreases. In addition, printouts may be faded.
[On], [Off] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Set this to [On] if paper jams occur due the paper getting caught in the ITB unit.
[On], [Off] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Configure this setting if the following symptoms occur when performing 2-sided printing:
Images are not printed in the intended size.
Printed images are shifted.
A paper jam or printing error occurs.
[On], [Off] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]The finish quality may be able to be improved by enabling this setting when using heavy paper without a smooth surface.
* When using plain paper without a smooth surface, set this to [Off]. Otherwise, fixing problems may occur.
[On], [Off] |
[ Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings/Registration] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Set this item to prevent the glue on envelope flaps from melting and sealing due to the heat and pressure of the fixing unit during envelope printing.
This setting is only enabled during envelope printing.
If this setting is set to [On], the quality of the image may be adversely affected.
[On], [Off] |