[Maintenance]

Perform operations to clean the machine, or watch videos on how to perform cleaning and maintenance.

[Clean Feeder]

[

Settings/Registration]

[Adjustment/Maintenance]

[Maintenance]

Clean the feeder. Perform this operation if originals become dirty or frequently jam when you use the feeder. Cleaning the Feeder

[Clean Pressure Roller for Fixing]

[

Settings/Registration]

[Adjustment/Maintenance]

[Maintenance]

Clean the fixing assembly. Perform this operation when the printed paper becomes dirty.

[Original Scanning Area Cleaning Method]

[

Settings/Registration]

[Adjustment/Maintenance]

[Maintenance]

Play a video to check how to clean the original scanning area.

* This item may not be displayed depending on the type of the feeder.

[Check Maintenance Method]

[

Settings/Registration]

[Adjustment/Maintenance]

[Maintenance]

Play videos to check how to replace consumables and remove jammed paper.

[Check Maintenance Method]

[Initialize After Replacing Parts]

[

Settings/Registration]

[Adjustment/Maintenance]

[Maintenance]

Initialize the printer after you replace parts. Initialize the printer for each replaced part.

[Initialize After Replacing Parts]

[Control Recognized Condensation]

[

Settings/Registration]

[Adjustment/Maintenance]

[Maintenance]

Set whether to start the process to remove condensation when condensation is detected inside the machine.
If you select [On] and press [OK], a screen asking whether to immediately perform the process to remove condensation is displayed. If you want to immediately start the process to remove condensation, press [Yes].

[On], [Off]

[Only Received Jobs], [All Jobs]

IMPORTANT

During the process to remove condensation, printing may not be performed correctly resulting in the paper being blank.

To maintain the effect of the process to remove condensation going when this mode is set to [On], it is necessary to keep the machine's power ON.

NOTE

Print jobs that are carried out during the process to remove condensation are restricted by the [Jobs to Restrict When Condensation is Recognized] settings.

[Only Received Jobs]: Regardless of the [Use Fax Memory Lock] or [Use I-Fax Memory Lock] settings, the received fax/I-fax data is stored in Memory RX Inbox. Reports that are automatically output at the specified time cannot be printed.

[All Jobs]: All print data cannot be printed during the process to remove condensation.