Settings/Registration] 
[Function Settings] [Copy][Copy]
Configure the settings for copying.
* Values in red text indicate the default setting for each item.
[ Settings/Registration] [Function Settings] [Copy]
Settings/Registration] [Function Settings] [Copy]Register the settings that suit your purposes and the settings that you want to recall as "Favorite Settings" to buttons. You can also change the names of registered buttons.
To register settings other than the default settings, configure the required settings on the copy screen, and then select this item.
To register settings other than the default settings, configure the required settings on the copy screen, and then select this item.
* This setting is the same as the setting in copy screen [
Menu] [Register/Edit Favorite Settings]. Registering and Recalling Favorite Settings
[ Menu] [Register/Edit Favorite Settings]. Registering and Recalling Favorite Settings[M1] to [M9] [Register] [Rename] [Delete] [Check Content] |
[ Settings/Registration] [Function Settings] [Copy]
Settings/Registration] [Function Settings] [Copy]Set whether to display the screen for confirming the settings when you call up "Favorite Settings."
[On], [Off] |
[ Settings/Registration] [Function Settings] [Copy]
Settings/Registration] [Function Settings] [Copy]Change the default settings for copying to those that are currently configured on the copy screen. Changing the Default Settings
When you press [
Reset] on the copy screen, the settings are reset to the default settings configured here.
When you press [
Reset] on the copy screen, the settings are reset to the default settings configured here.* To restore the default settings to the factory default settings, press [Initialize].
* This setting can be configured by each login user.
[Register] [Initialize] |
[ Settings/Registration] [Function Settings] [Copy]
Settings/Registration] [Function Settings] [Copy]Replace the shortcut buttons on the copy screen with other [Options] or [Favorite Settings] buttons. Customizing the Scan, Fax, and Copy Screens
* This setting can be configured by each login user.
Shortcut 1 [Orig. Content Orientation] Shortcut 2 [2-Sided] Shortcut 3 [Density] Shortcut 4 [Original Type] Shortcut 5 [Unassigned] / [Copy ID Card]*1 |
*1The default setting varies depending on the model and the region.
[ Settings/Registration] [Function Settings] [Copy]
Settings/Registration] [Function Settings] [Copy]Set whether the machine automatically performs finishing with [Collate (Page Order)] when an original is placed in the feeder.
When Setting [Offset] at the Same Time (For the Model with the Finisher)
Set [Offset at Same Time] to [On].
If the tray at the copy output destination does not support offset, but there is another tray that supports offset, the copies will be output to the tray that supports offset. If you want the copies to be output as specified in the output tray settings, select [Off] for this setting.
[On], [Off] [Offset at Same Time] (for the model with the finisher) [On], [Off] |
[ Settings/Registration] [Function Settings] [Copy]
Settings/Registration] [Function Settings] [Copy]Set the color modes that can be selected when copying.
[Use Auto (Color/Black & White)] [On], [Off] [Use Full Color] [On], [Off] [Use Single Color] [On], [Off] [Use Two Colors] [On], [Off] |
[ Settings/Registration] [Function Settings] [Copy]
Settings/Registration] [Function Settings] [Copy]Set whether to insert a job separator between each set of grouped pages, when you make multiple copies using the "Group" setting to sort the copies by page. When you enable this setting, select the paper source in which the job separators are loaded.
[On], [Off] [Change] (Select the paper source) |