Settings/Registration] 
[Preferences] [Network] [Sub Line Settings][Sub Line Settings]
Configure the sub line settings when a setting other than [Off] is selected for [Sub Line] in [Select Interface].
* Values in red text indicate the default setting for each item.
[ Settings/Registration] [Preferences] [Network] [Sub Line Settings]
Settings/Registration] [Preferences] [Network] [Sub Line Settings]Automatically or manually set the IPv4 address to use for the sub line. Setting the IPv4 Address of the Sub Line
[DHCP] On, Off [IP Address]: 0.0.0.0 [Subnet Mask]: 0.0.0.0 [Gateway Address]: 0.0.0.0 |
[ Settings/Registration] [Preferences] [Network] [Sub Line Settings]
Settings/Registration] [Preferences] [Network] [Sub Line Settings]Select whether to connect mobile devices to the main line or sub line when the machine communicates with mobile devices.
[Main Line], [Sub Line] |
[ Settings/Registration] [Preferences] [Network] [Sub Line Settings]
Settings/Registration] [Preferences] [Network] [Sub Line Settings]Set the Ethernet communication mode for the sub line. Manually Configuring the Ethernet Settings
You can also check the current transmission speed and the MAC address of the wired LAN. Checking the MAC Address of the Wired LAN
You can also check the current transmission speed and the MAC address of the wired LAN. Checking the MAC Address of the Wired LAN
* When you set [Ethernet Type] to [1000BASE-T], [Communication Mode] is set to [Full Duplex].
[Auto Detect] [On], [Off] [Communication Mode] [Half Duplex], [Full Duplex] [Ethernet Type] [10BASE-T], [100BASE-TX], [1000BASE-T] [Current Transmission Speed] [MAC Address] |
[ Settings/Registration] [Preferences] [Network] [Sub Line Settings]
Settings/Registration] [Preferences] [Network] [Sub Line Settings]Configure the IEEE 802.1X settings to be used for the sub line. Using IEEE 802.1X
[Use IEEE 802.1X] [On], [Off] [Login Name] [Verify Authentication Server Certificate] [On], [Off] [Verify Authentication Server Name] [On], [Off] [Authentication Server Name] [Use TLS] [On], [Off] [Key and Certificate] [Set as Default Key] [Certificate Details] [Version] [Serial Number] [Signature Algorithm] [Issued To] [Validity Start Date] [Validity End Date] [Issuer] [Public Key] [Certificate Thumbprint] [Issued To (Altn. Name)] [Verify Certificate] [Display Use Location] [Use TTLS] [On], [Off] [<TTLS Settings (TTLS Protocol)>] [MSCHAPv2], [PAP] [Use PEAP] [On], [Off] [User Name] [Password] [Same User Name as Login Name] [On], [Off] |
[ Settings/Registration] [Preferences] [Network] [Sub Line Settings]
Settings/Registration] [Preferences] [Network] [Sub Line Settings]Configure the IP address filter and MAC address filter settings for the sub line.
[ Settings/Registration] [Preferences] [Network] [Sub Line Settings]
Settings/Registration] [Preferences] [Network] [Sub Line Settings]Configure the DNS and proxy settings to use when performing specific system data communication over the sub line.