[Custom Settings]

Configure the settings common to the printer functions.

* Values in red text indicate the default setting for each item.

Set the number of copies to print.

Set whether to use 2-sided printing.

Set whether to automatically skip errors that occur during printing.
The Auto Error Skip function enables the machine to temporarily clear the error and continue printing. Therefore, printing may not be performed correctly when an error is skipped.
It is recommended that you normally set this to [Off]. In this case, if printing stops due to an error that occurs, manually skip the error by pressing [Status Monitor] [Details] [Skip Error].

* You may not be able to skip some types of errors.

Set whether to cancel printing when a certain period of time has elapsed after the reception of print data is suspended.
To cancel printing, select [On] and set the amount of time from the start of reception standby until the timeout occurs. This setting applies to print data received via USB or the network.

* For the model with the finisher, when you set this item to [Off], you may not be able to perform copying until the printing that uses the Staple settings has been completed.

Normally, select [Auto] so that the machine automatically identifies the received print data and switches to the appropriate operating mode. In this case, you can specify the operating modes to which the machine can switch. [Auto Select]
Set which operating mode the machine uses when the operating mode is not switched due to a reason such as an unknown print data format.

When you set [Personality] to [Auto], select which operating mode is given priority as the one to which the machine switches.
This setting is applied when the machine cannot identify the operating mode of the print data.
If you select [None] and the machine cannot identify the operating mode of the print data, the machine will continue processing the data with the operating mode that was previously in use.

Set the operating modes that the machine can switch to, when you set [Personality] to [Auto].

Set whether to automatically switch between color printing and black and white printing according to the print data, or use black and white printing for all print data.

* When you select [Auto (Color/B&W)], data that appears to be a black and white image may be counted as a color print if the data was created as a color original or if a color image is hidden underneath the black and white image.

Reset all items in [Custom Settings] to the factory default settings.