Connecting to a Wireless LAN by Setting the Details (Manual Setup Mode)
You can connect to a wireless LAN router by manually entering all information of the router such as the SSID (network name), network key (password), and security settings.
A wireless LAN connection requires Administrator or NetworkAdmin privileges.
Required Preparations
Prepare the information of the wireless LAN router to which you want to connect, and keep it close by. Wireless LAN Router Information Required for Connection
When connecting to a wireless LAN router using WPA-EAP, WPA2-EAP, or WPA3-EAP security standards, use IEEE 802.1X. Using IEEE 802.1X
1
Log in to the machine as an administrator. Logging In to the Machine
2
On the control panel, press [
Settings/Registration] in the [Home] screen or other screen. [Home] Screen
Settings/Registration] in the [Home] screen or other screen. [Home] ScreenThe [Settings/Registration] screen is displayed.
3
Press [Preferences] 
[Network] [Wireless LAN] [Wireless LAN Settings].
[Network] [Wireless LAN] [Wireless LAN Settings].The [Wireless LAN Settings] screen is displayed.
Press [Other (Set Manually)] [Enter Manually].
[Enter Manually].The [Enter Manually] screen is displayed.
5
Press [SSID] and enter the SSID.
6
In [Security Settings], select the security standard, and set the authentication and encryption.
When Using WPA-PSK, WPA2-PSK, or WPA3-SAE
1
Press [WPA/WPA2-PSK].
The [Security Settings] screen is displayed.
2
Press [Encryption Key] and enter the network key.
3
Press [OK].
The [Enter Manually] screen reappears.
When Using WPA-EAP, WPA2-EAP, or WPA3-EAP
Press [WPA/WPA2-EAP].
When Not Using a Security Standard
Press [None].
7
Press [OK].
The connection starts.
If [Security Settings] is set to [WPA/WPA2-EAP], the message [The settings specified in IEEE 802.1X Settings will be applied to the connection.] is displayed. Press [OK] to start the connection.
If [Security Settings] is set to [WPA/WPA2-EAP], the message [The settings specified in IEEE 802.1X Settings will be applied to the connection.] is displayed. Press [OK] to start the connection.
8
When [Connected.] appears on the screen of the machine, press [OK].
9
Set the IP address.
NOTE
If an Error Message Appears during Operation and a Connection Cannot Be Established
Press [OK], check the information of the wireless LAN router to which you want to connect, and repeat the procedure starting from Step 4.