Search for a Wi-Fi router (access point) to which to connect, and enter the network key.
When you connect with the access point setup method, the encryption method for WPA/WPA2/WPA3 is set to AES-CCMP.
When you want to use a different encryption method, connect with the manual setup method. Connecting to a Wi-Fi by Setting the Details (Manual Setup Method)
Connecting to a Wi-Fi by Searching for a Router (Access Point Setup Method)
Administrator privileges are required to connect to a Wi-Fi.
Required Preparations |
Prepare the information of the Wi-Fi router (SSID or network key) to which you want to connect, and keep it close by. Wi-Fi Router Information Required for Connection When connecting to a Wi-Fi router supporting WPA-EAP or WPA2-EAP for the security standard, set IEEE 802.1X. Using IEEE 802.1X |
1
On the control panel, select [Menu] in the [Home] screen, and press 
. [Home] Screen
. [Home] Screen2
Press [Preferences] 
[Network] [Wi-Fi Settings] .
[Network] [Wi-Fi Settings] .The [Select Network] screen is displayed.
If the login screen appears, enter the Administrator ID and PIN, and then press [<Log In>] . Administrator ID and PIN
. Administrator ID and PINIf the message [Do you want to enable Wi-Fi?] appears, select [Yes] and press .
.If the message [Cannot find any access point.] appears, check that the router is discoverable. Cannot Connect to Wi-Fi
3
Select the SSID of the Wi-Fi to which you want to connect, and press .
.The Network Key input screen is displayed.
When selecting the SSID of the Wi-Fi router supporting WPA-EAP or WPA2-EAP for the security standard, the message [IEEE 802.1X Settings values will be applied to connect.] appears. Press, and proceed to Step 4.
When selecting the SSID of the Wi-Fi router supporting WPA-EAP or WPA2-EAP for the security standard, the message [IEEE 802.1X Settings values will be applied to connect.] appears. Press
, and proceed to Step 4.If you cannot find the Wi-Fi router to which you want to connect, check that the router is discoverable. Cannot Connect to Wi-Fi
4
Enter the network key, and press [<Apply>] .
.5
Press [Yes] .
.6
When [Connected.] is displayed on the control panel, press .
.When the machine is connected to the Wi-Fi, [
] appears on the [Home] screen.
] appears on the [Home] screen.7
Wait a few minutes.
By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses
Setting IPv6 Addresses
To use a specific IP address, set this manually.
Setting IPv4 Addresses
Setting IPv6 Addresses
 |
If an Error Message Appears during Operation and a Connection Cannot Be EstablishedPress , check the information (SSID or network key) of the Wi-Fi router to which you want to connect, and repeat the procedure starting from Step 2. |