Enlarging/Reducing a Copied Image

Steps for enlarging or reducing the size of a copied image are described here.

In addition to standard-size scaling, such as <STMT -> LTR>, you can also specify any scaling in 1% increments.

Place the original in the feeder or on the platen glass.

Select <Copy> in the Home screen.

Select <Copy Ratio>.

Specify copy ratio items.

<100% Direct>

Makes copies at a copy ratio of 100%.

<Auto>

Makes copies by automatically enlarging/reducing the original image to fit the specified paper size.

Preset copy ratio

Select a copy ratio.

Numeric keys

You can specify any copy ratio from 25% to 400% in 1% increments.

Specify copy settings if necessary.

If you specify <N on 1> after specifying a copy ratio, the copy ratio specified with <N on 1> overrides the previous copy ratio.

Select <Start>.

Copying starts.

If the original is placed in the feeder

The original is automatically scanned.

If 2-sided copying or N on 1 is specified, a message prompting you to place a next original appears on the display. Perform the following steps.

Place the next original on the platen glass, and select <Scan Next>.

Repeat this step until all originals are scanned.

Select <Start Printing>.