A Portion of the Page Is Not Printed

A possible cause may be that there is a problem with the margin settings or paper is not loaded properly. Check the following.

Do you print data without margins?

This symptom occurs if a margin is set to none in the printer driver. Make sure to have margins around the document to print.

[Finishing] tab

[Advanced Settings]

[Expand Print Region and Print]

[Off]

Do the paper guides align with the edges of the paper?

If the paper guides are too loose or too tight, part of a document may not be printed. Loading Paper

Is the machine installed in an environment where the temperature changes rapidly and drastically?

When the temperature changes rapidly in the environment where the machine is installed, condensation occurs, which may cause fading or bleeding in images and text. If <Control Condensation> is set to <On>, condensation inside the machine will be removed. Condensation removal may be performed automatically due to temperature change. <Maintenance>

IMPORTANT

While condensation removal is being performed, printing may not be performed properly and blank paper may be output.

If you set to <On>, you need to keep the machine turned ON to maintain the effect of condensation removal.

If you set to <On>, the setting of Auto Shutdown is disabled. Powering OFF at a Fixed Time