Paper Curls

A possible cause may be that appropriate paper is not used. Check the following.

Are you using appropriate paper?

Check usable paper, and replace with appropriate paper. Also, specify the paper size and type settings properly.

Available Paper

Loading Paper

Specifying Paper Size and Type

Change the setting of <Paper Curl Correction>. The improvement effect is stronger with <Mode 2> than <Mode 1>. First try with <Mode 1>. <Adjust Image Quality>

NOTE

Setting a greater improvement effect may result in faded printouts or slower printing speed.

Reload the paper by changing the side to print on (front side/back side).

IMPORTANT

In rare cases the symptom may become worse depending on the paper. If this occurs, change the side to print on back to the previous side.

Are you using paper that has absorbed moisture?

Replace with appropriate paper. Loading Paper

Change the setting of <Paper Type> to a setting for thinner paper. For example, if the current setting is <Plain 1>, change it to <Thin 1>.

Specifying Paper Size and Type

Available Paper

Change the setting of <Paper Curl Correction>. The improvement effect is stronger with <Mode 2> than <Mode 1>. First try with <Mode 1>. <Adjust Image Quality>

NOTE

Setting a greater improvement effect may result in faded printouts or slower printing speed.