NOTE
|
For information on how to configure the header/footer on a chapter basis, see the following.
|
NOTE
|
If the Details Window is not displayed, see the following.
Select the [Insert Header/Footer into Original Pages] check box to set the header/footer for the original page. To use a ribbon command to do this, select the [Insert Header/Footer] check box in the [Original Pages] group on the ribbon.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
[Header Setting Method]
|
Options for setting the header.
|
[Insert common headers in entire document]
|
Select this when you want to insert headers throughout an entire document.
|
[Insert headers by chapter]
|
Select this when you want to insert headers individually for each chapter.
|
[Add]
|
You can select this when [Insert headers by chapter] has been selected. It will insert the same header for all chapters between the first and last chapter you selected.
|
[Edit]
|
Click this to change the range in which to insert the header.
|
[Delete]
|
Click this to delete the set range in which to insert the header.
|
[Header Settings]
|
The items you selected in [Header Setting Method] are displayed.
|
[Left]
|
Inserts the header on the left side.
|
[Center]
|
Inserts the header in the middle.
|
[Right]
|
Inserts the header on the right side.
|
[Do Not Insert Headers Into]
|
Use this when there is an item in which you do not want to insert a header.
|
[First page of document]
|
Select this check box when you do not want to insert a header in the first page.
|
[Last page of document]*
|
Select this check box when you do not want to insert a header in the last page.
|
[First page of each chapter]
|
Select this check box when you do not want to insert a header in the first page of the chapter.
|
[Place headers in opposite positions for front and back sides]*
|
Select this check box when you want to place the headers in the opposite positions for the front and back sides.
|
[Place headers in opposite positions for odd- and even-numbered pages]*
|
Select this check box when you want to place the headers in opposite positions for odd and even numbered pages.
|
NOTE
|
This procedure is the same for [Insert Header/Footer into Print Pages] and [Insert Header/Footer into Original Pages].
The items displayed in [Do Not Insert Headers Into] differ according to the printing method.
1-Sided Printing:
[First page of document]
[First page of each chapter]
2-Sided Printing:
[First page of document]
[Last page of document]
[First page of each chapter]
[Place headers in opposite positions for front and back sides]
Booklet Printing:
[First page of document]
[Last page of document]
[First page of each chapter]
[Place headers in opposite positions for odd- and even-numbered pages] (This setting is available for book type booklet printing.)
When specifying detailed footer settings, detailed footer settings are displayed. The settings are the same as those for the header.
|
NOTE
|
The procedure for the header/footer is the same for both printed pages and original pages.
|
NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
You can also directly enter the header/footer.
Multiple headers/footers can be entered in a single location.
|
NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
[Header Font]
|
Enables you to specify the font settings to use for the header.
For the footer, [Footer Font] is displayed.
|
[Font]
|
Select a font to use. The list displays the fonts installed in your computer.
|
[Size]
|
Select a font size to use. You can also enter the font size directly. Font sizes that can be configured are between 3.0 and 72.0 points. If it is entered directly, the figures below the second decimal place are omitted.
|
[Style]
|
To make the text bold, select [Bold].
To make the text italic, select [Italic].
|
[Font Color]
|
Select a font color to use. When you want to use a color that is not available in the list, click [More Colors].
|
[More Colors]
|
If you click this, the [Color] dialog box is displayed. On the [Color] dialog box, you can set a color that is not listed in [Font Color].
|
NOTE
|
The font settings in both [Insert Header/Footer into Print Pages] and [Insert Header/Footer into Original Pages] are the same.
When specifying font settings for a footer, the [Footer Font Settings] dialog box is displayed. The settings are the same as those in the header font settings.
|
NOTE
|
You can also specify the font settings by performing the following operations.
Select [Font Settings] from the pull-down list of each [Header]/[Footer] in [Header/Footer Settings] on the [Page Settings] tab on the Details Window
Select [Font Settings] from the pull-down list of each [Header]/[Footer] in the [Print Pages]/[Original Pages] groups on the ribbon
|
NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
Click [Restore Defaults] to return the header/footer to the standard position.
|
NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
[Page Number]
|
Enables you to specify the detailed page number settings.
|
[Format]
|
Select the desired format from the pull-down list.
|
[Specify Starting Page]
|
Select this check box to specify the starting page.
|
[Start Page]
|
Enter the starting page.
The starting page can be entered when [Specify Starting Page] is selected.
|
[Specify start page number]
|
Select this check box to specify the starting page number.
|
[Start Page Number]
|
Enter the starting page number.
The starting page can be entered when [Specify start page number] is selected.
|
[Chapter Number]
|
Enables you to specify the detailed chapter number settings.
|
[Format]
|
Select the desired format from the pull-down list.
|
[Specify start chapter]
|
Select this check box to specify the starting chapter.
|
[Start Chapter]
|
Enter the starting chapter.
The starting page can be entered when [Specify start chapter] is selected.
|
[Specify start chapter number]
|
Select this check box to specify the starting chapter number.
|
[Start Chapter Number]
|
Enter the starting chapter number.
The starting page can be entered when [Specify start chapter number] is selected.
|
[Page Number in Chapter]
|
Enables you to specify the detailed page number settings in the chapter.
|
[Format]
|
Select the desired format from the pull-down list.
|
[Specify start page number]
|
Select this check box to specify the starting page number in the chapter.
|
[Start Page Number]
|
Enter the starting page number.
The starting page can be entered when [Specify start page number] is selected.
|
NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|