You can configure the paper source used when printing the document text on a document.
You can configure the paper source settings for the specified chapter differently from the entire document.
NOTE
|
The paper source setting is prioritized in the order page > chapter > document.
This function can only be used when you select a Canon printer and the [Use print settings of Editor] check box on the [Print Settings] tab on the Details Window, the ribbon command, or the tool button.
The document text are the pages other than the following specified in [Sheet for Insertion].
Front cover
Back cover
Tab paper
Sheets
For details on how to set Front cover, Back cover, Tab paper, and Sheets, see the following.
When setting the paper source for the entire document, see the following.
For more information on how to set the paper source on a page basis, see the following.
For more information on how to cancel the settings on a chapter basis, see the following.
|
NOTE
|
If the [Page Tree] tab on the Navigation Window is not displayed, see the following.
|
NOTE
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
The setting items in [Paper Source of Content Pages] vary depending on the paper source of the printer selected in [Printer].
|