Configuring the Header/Footer on a Chapter Basis

You can specify the header/footer settings by chapter.
1.
Select the [Insert Header/Footer into Print Pages] check box in [Header/Footer Settings] on the [Page Settings] tab on the Details Window.
Or, select the [Insert Header/Footer] check box in the [Print Pages] group on the ribbon.
The pull-down list of settings to configure in the header/footer is displayed.
NOTE
If the Details Window is not displayed, see the following.
Select the [Insert Header/Footer into Original Pages] check box to set the header/footer for the original page. To use a ribbon command to do this, select the [Insert Header/Footer] check box in the [Original Pages] group on the ribbon.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
2.
Select the header/footer settings from the pull-down list in [Header/Footer Settings] on the [Page Settings] tab on the Details Window.
Or, select the items to set for the header/footer from the pull-down list of each [Header]/[Footer] in the [Print Pages]/[Original Pages] groups on the ribbon.
NOTE
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
3.
Click [Detailed Settings for Header/Footer] in [Header/Footer Settings] on the [Page Settings] tab on the Details Window.
Or, follow one of the steps described below.
Select [Detailed Settings] from each [Header]/[Footer] pull-down list
Click (Header/Footer on Print) on the ribbon
Click (Header/Footer on Original) on the ribbon
Select [Detailed Settings] from the pull-down list of each [Header]/[Footer] in the [Print Pages]/[Original Pages] groups on the ribbon
The [Detailed Settings for Headers/Footers (Print Pages)] dialog box is displayed.
NOTE
This procedure is the same for [Insert Header/Footer into Print Pages] and [Insert Header/Footer into Original Pages].
When specifying detailed footer settings, detailed footer settings are displayed. The settings are the same as those for the header.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
4.
Select [Header Setting Method] > [Insert headers by chapter].
5.
Click [Add].
The [Header Settings by Chapter] dialog box is displayed.
6.
Enter a chapter number in [Start Chapter] and [End Chapter].
7.
Click [OK].
The [Detailed Settings for Headers/Footers (Print Pages)] dialog box is displayed again.
If you want to set the header/footer for other chapters, repeat step 5.
For information on the detailed header/footer settings, see the following.
NOTE
The following items cannot be selected when setting the header/footer by chapter.
[First page of document]
8.
Click [OK].
11FC-0FJ