NOTE
|
If the Details Window is not displayed, see the following.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
When you want to insert polygon lines multiple times, double-click
![]() Perform one of the following operations to cancel the button selection.
Click the selected button on the Details Window again
Click another button on the Details Window
Click a command on the ribbon
Press the [Esc] key on the keyboard.
You can click
![]() |
[Line Style]
|
Select the line style you want to use from the list displayed when you click
![]() |
[Line Weight]
|
Set the line thickness. You can specify a line thickness from 0.25 point to 12.00 point. You can specify a line thickness in units of 0.25 point by using
![]() |
[Begin Style]
|
Select the style for the beginning of the line you want to use from the list displayed when you click
![]() |
[End Style]
|
Select the style for the end of the line you want to use from the list displayed when you click
![]() |
[Line Color]
|
Select the line color you want to use from the list displayed when you click
![]() |
[Shape Fill]
|
Select the color of the arrow to fill with that you selected in [Begin Style] and [End Style] from the list displayed when you click
![]() |
NOTE
|
The type of line selected in [Line Style] is not applied to the arrow selected in [Begin Style] or [End Style].
If you select [More Colors] in [Line Color] or [Shape Fill], the [Color] dialog box is displayed and you can set a color that is not listed in [Line Color] or [Shape Fill].
You can also configure the properties of the annotation with the following commands.
![]() ![]() ![]() ![]() ![]() ![]() If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
To cancel the insertion process, do one of the following.
Click
![]() Click
![]() Click
![]() Click the command selected on the ribbon again
Click
![]() Click
![]() Click
![]() Click the selected button on the Details Window again
Press the [Esc] key on the keyboard
|
NOTE
|
You can press the [BACKSPACE] key on the keyboard to cancel a vertex you just made.
You can create horizontal vertices, vertical vertices, and vertices at 45 degree angles by clicking the mouse pointer while holding down the [Shift] key on the keyboard.
You can press the [Esc] key on the keyboard to clear all the specified vertices.
|
NOTE
|
The following occurs if you perform an operation that prevents additional vertices from being specified, such as clicking somewhere other than the Work Window while drawing.
If you have specified two or more vertices, the polygon line is fixed.
If you have specified one vertex, the specified vertex is cleared.
You can drag the handle of a vertex to move that vertex. For more information, see the following.
|