NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
To cancel the area selection process, do one of the following.
Click (Select Object) on the ribbon
Click (Select Text) on the ribbon
Click (Grab Mode) on the ribbon
Click (Rectangle) on the ribbon
Click (Select Area) on the ribbon and select [Rectangle]
Click (Select Object) on the Details Window
Click (Select Text) on the Details Window
Click (Grab Mode) on the Details Window
Click the selected button on the Details Window again
Press the [Esc] key on the keyboard
|
NOTE
|
The entire page is selected if one of the following operations is performed.
Click (Select All) on the ribbon
Right-click and select [Select All]
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them.
Perform one of the following operations to cancel the area selection.
Click on the Work Window outside the selected area
Change the page
Press the [Esc] key on the keyboard.
|
NOTE
|
If you drag any of the corner handles while holding down the [Shift] key on the keyboard, you can adjust the copy area while maintaining the aspect ratio of the rectangle.
|
NOTE
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them.
The following annotations are not copied:
The note part of text notes
The note icon of text notes
The status icon of digital stamps
You can change the resolution of copied images in [Resolution Settings when Copying Image] in [System Settings].
[File] menu > [Option] > [System Settings] > [Editor] > [Annotations] > [Resolution Settings when Copying Image] > [Resolution]
|
NOTE
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them.
Areas copied as an image can also be pasted in another application. Images copied in other applications can also be pasted to Desktop Editor.
|
NOTE
|
If the Details Window is not displayed, see the following.
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them.
|
NOTE
|
To cancel the area selection process, do one of the following.
Click (Select Object) on the ribbon
Click (Select Text) on the ribbon
Click (Grab Mode) on the ribbon
Click (Polygon) on the ribbon
Click (Select Area) on the ribbon and select [Polygon]
Click (Select Object) on the Details Window
Click (Select Text) on the Details Window
Click (Grab Mode) on the Details Window
Click the selected button on the Details Window again
Press the [Esc] key on the keyboard
|
NOTE
|
You can press the [BACKSPACE] key on the keyboard to cancel a vertex you just made.
You can create horizontal vertices, vertical vertices, and vertices at 45 degree angles by clicking the mouse pointer while holding down the [Shift] key on the keyboard.
|
NOTE
|
The entire page can be selected with four vertices if one of the following operations is performed.
Click (Select All) on the ribbon
Right-click and select [Select All]
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
Perform one of the following operations to cancel the area selection.
Click on the Work Window outside the selected area
Change the page
Press the [Esc] key on the keyboard.
To delete all the vertices you have created, change the page or press the [Esc] key on the keyboard.
The following occurs if you perform an operation that prevents additional vertices from being specified, such as clicking somewhere other than the Work Window while drawing.
If you have specified three or more vertices, the area to copy is fixed.
If you have specified two or fewer vertices, the specified vertices are cleared.
|
NOTE
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them.
The following annotations are not copied:
The note part of text notes
The note icon of text notes
The status icon of digital stamps
You can change the resolution of copied images in [Resolution Settings when Copying Image] in [System Settings].
[File] menu > [Option] > [System Settings] > [Editor] > [Annotations] > [Resolution Settings when Copying Image] > [Resolution]
|
NOTE
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them.
Areas copied as an image can also be pasted in another application. Images copied in other applications can also be pasted to Desktop Editor.
|