Checking the List of Insertable Stamped Images
You can display the stamped image list that is registered in Desktop Editor. You can also switch between showing/hiding the registered stamped images.
Hiding Stamped Images
This section describes how to hide the selected stamped images in the stamped image list.
1.
Click 
(Stamped Image List) on the ribbon.
(Stamped Image List) on the ribbon.Or, follow one of the steps described below.
Start the Digital Stamps Mode, click 
in the digital stamp list on the ribbon, and select [Stamped Image List].
in the digital stamp list on the ribbon, and select [Stamped Image List].Select the [File] menu > [Settings/Management] > [Stamped Image List].
The [Stamped Image List] dialog box is displayed.
|
NOTE
|
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
For information on how to start the Digital Stamps Mode, see the following.
|
2.
Select a stamped image to hide from [Stamped Image List].
3.
Click [Hide].
Or, deselect the check box next to the stamped image.
4.
Click [Close].
The selected stamped image is no longer displayed on the ribbon.
Displaying Hidden Stamped Images Again
This section describes how to display stamped images hidden on the stamped image list again.
1.
Click (Stamped Image List) on the ribbon.
(Stamped Image List) on the ribbon.Or, follow one of the steps described below.
Start the Digital Stamps Mode, click in the digital stamp list on the ribbon, and select [Stamped Image List].
in the digital stamp list on the ribbon, and select [Stamped Image List].Select the [File] menu > [Settings/Management] > [Stamped Image List].
The [Stamped Image List] dialog box is displayed.
|
NOTE
|
|
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
For information on how to start the Digital Stamps Mode, see the following.
|
2.
Select a stamped image to display again from [Stamped Image List].
3.
Click [Show].
Or, select the check box next to the stamped image.
4.
Click [Close].
The selected stamped image is displayed on the ribbon again.